---
# System prepended metadata

title: Lab01 -- packet tracer edition
tags: [Lab]

---

# Lab01 -- packet tracer edition

###### tags: `Lab`

Documentation while playing around in packet tracer...

## Virtual hardware
After some experimenting, router 1841 apears to be the most simular to the one we used during our lab, you'll have to add a serial connector to it though:
![](https://i.imgur.com/ePpPeMs.png)

After you can just connect the hardware togheter like we did in our lab asignment:
![](https://i.imgur.com/HVIrXCw.png)

## Steps

### Allow pinging from one laptop to the other

#### Configure the serial one on one connection

##### configureer router
Kies no
```
Would you like to enter the initial configuration dialog? [yes/no]
```
duw enter

##### Router 1
Disable domain lookup, no time to waste :)
```
ena
conf t
no ip domain-lookup
end
copy r s
```

configure the serial connector
```
conf t
int Serial0/0/1
ip add 91.182.207.205 255.255.255.252
no shut
end

```

##### Router 2
Disable domain lookup, no time to waste :)
```
ena
conf t
no ip domain-lookup
end
copy r s
```
configure the serial connector
```
conf t
int Serial0/0/0
ip add 91.182.207.206 255.255.255.252
no shut
end
```
#### Result
If it was succesfully configured you should see visable feedback that it can detect each other:
![](https://i.imgur.com/uCSmdjm.png)
If thats the case, save again ?

#### Configere both networks
`sho ip int` Check what interfaces there are to put the network on.

##### Network 1
![](https://i.imgur.com/EiwvrJ9.png)

Use the available interface to host the local network on

```
conf t
int fa0/0
ip add 10.8.8.1 255.255.255.0
no shut
```


##### Network 2
![](https://i.imgur.com/pTS2pqb.png)
Use the available interface to host the local network on
```
conf t
int fa0/0
ip add 172.16.8.1 255.255.254.0
no shut
```

##### Result
If everything is connected properly it should light up green
![](https://i.imgur.com/k3l6u4R.png)

It's also possible to check it by pinging the router from the designated laptop


#### Adding routing to get things connected  over the Serial connection
##### Router 1
```
conf t
ip route 0.0.0.0 0.0.0.0 91.182.207.206
end
```

##### Router 2
```
conf t
ip route 10.8.8.0 255.255.255.0 91.182.207.205
end
```

##### Result
laptop can succesfully ping over the serial bridge ![](https://i.imgur.com/f5ljhxT.png)

#### Preparing to add network router

Basicly adding a swtich and testing the connection again

![](https://i.imgur.com/qkCnv1x.png)

pinging the laptop0 still works :) ![](https://i.imgur.com/Tw4ITcQ.png)

#### Adding internet acces



