# 1-866-203-7571 Brother Printer Won’t Turn On Error | 4 Quick Fixes

**Printer Tales Support: 1-866-203-7571**

Brother printers are known for their reliability, but like any electronic device, they can sometimes fail to power on. If your Brother printer won’t turn on, it can stop your work completely and create unnecessary stress—especially when you have urgent documents to print.

The good news? In most cases, this issue is caused by simple problems such as power supply faults, cable issues, internal errors, or firmware glitches. In this guide, we’ll explain **why your Brother printer is not turning on** and walk you through **4 quick fixes** that can get your printer working again.

If the problem continues after trying these steps, you can always reach expert help at **Printer Tales – 1-866-203-7571**.

## Why Your Brother Printer Won’t Turn On

Before jumping into fixes, it helps to understand what might be causing the issue. Common reasons include:

* Faulty power outlet or extension cord
* Damaged power cable or adapter
* Internal power supply failure
* Printer stuck in a hardware error state
* Firmware corruption or electrical surge damage

Any one of these can prevent your Brother printer from powering up. Let’s now go through the **4 quick fixes** you should try first.

**Call Printer Tales at 1-866-203-7571**

## Quick Fix 1: Check the Power Source and Cables

The most common reason a Brother printer won’t turn on is a simple power issue.

### Step-by-Step Instructions

1. **Check the Power Outlet**
Plug another device (like a phone charger or lamp) into the same outlet.

* If it doesn’t work, the outlet is faulty.
* Try a different wall socket.

2. **Avoid Power Strips or Surge Protectors**
Plug your Brother printer **directly into the wall outlet**.
Power strips can sometimes fail or block enough voltage.

3. **Inspect the Power Cable**
Look closely for:

* Cuts or frayed wires
* Burn marks
* Loose connectors

If the cable looks damaged, replace it with a compatible Brother power cord.

4. **Check the Power Adapter (if your model uses one)**
Some Brother printers have external adapters. Make sure:

* The adapter LED is on
* The cable is firmly plugged into both the printer and the outlet

### Why This Works

If your printer isn’t getting consistent power, it simply won’t start. A bad outlet or cable is often the real culprit—not the printer itself.

**Call Printer Tales at 1-866-203-7571**

## Quick Fix 2: Perform a Hard Reset on Your Brother Printer

Sometimes your printer is actually “on,” but stuck in a frozen hardware state. A hard reset can clear internal errors.

### How to Hard Reset a Brother Printer

1. Turn the printer **off** using the power button.
2. Unplug the **power cable from the back of the printer**.
3. Unplug the **power cable from the wall outlet**.
4. Wait for **5–10 minutes**.
5. Plug the power cable back into the wall.
6. Plug the cable back into the printer.
7. Press the **Power button** to turn the printer on.

### What This Does

A hard reset drains residual electrical charge and resets the internal memory, which can fix power-related glitches caused by static electricity or minor firmware freezes.

**Call Printer Tales at 1-866-203-7571**

## Quick Fix 3: Check for Internal Hardware or Panel Issues

If your Brother printer shows **no lights, no screen, and no sound**, the issue could be internal—but you can still check a few things safely.

### Things to Inspect

1. **Control Panel & Buttons**
Press the power button firmly and hold it for 5 seconds.

* Sometimes the button doesn’t register a quick tap.

2. **Open and Close All Covers**

* Open the front cover
* Open the toner/ink access door
* Close them properly until you hear a click

Some Brother printers won’t power on if a door sensor is stuck.

3. **Remove and Reinsert Toner/Ink Cartridges**
Power off and unplug first.
Then:

* Remove cartridges
* Reinsert them properly
* Close all covers and try powering on again

### Why This Helps

If a sensor inside your Brother printer thinks something is “open” or missing, it can prevent the printer from booting normally.

**Call Printer Tales at 1-866-203-7571**

## Quick Fix 4: Update or Recover the Firmware (If Printer Powers On Briefly)

In some cases, the printer might power on for a second and then shut off again. This can happen due to corrupted firmware.

### When to Try This

* The printer turns on and off repeatedly
* Lights flash and then go dark
* Screen briefly shows the Brother logo

### Firmware Recovery Steps

1. Connect your printer to a computer via **USB cable**.
2. Visit Brother’s official support website.
3. Download the **latest firmware** for your printer model.
4. Run the update tool and follow the on-screen instructions.

> ⚠️ If your printer won’t stay on long enough to connect, stop here and call support.

### Why Firmware Matters

Outdated or corrupted firmware can stop your Brother printer from completing its startup process.

**Call Printer Tales at 1-866-203-7571**

## Additional Troubleshooting Tips

If none of the 4 quick fixes worked, try these extra steps:

### ✔ Try a Different Power Cord

Even if your cord looks fine, internal wire damage can prevent proper power flow.

### ✔ Check for Burn Smell or Heat

If you notice:

* A burning smell
* Excessive heat
* Crackling sounds

👉 Unplug the printer immediately and **do not attempt to power it on again**. This could be a power board issue.

### ✔ Avoid DIY Internal Repairs

Opening the printer can:

* Void the warranty
* Cause more damage
* Create safety risks

**Call Printer Tales at 1-866-203-7571**

## When to Call Brother Printer Support

If your Brother printer still won’t turn on after all these steps, the problem is likely related to:

* Internal power supply board
* Main logic board failure
* Severe electrical surge damage

At this point, professional help is the best option.

📞 **Call Printer Tales at 1-866-203-7571**
Our technicians can:

* Diagnose the exact cause
* Guide you through advanced fixes
* Help you decide whether repair or replacement is the best option

**Call Printer Tales at 1-866-203-7571**

## Frequently Asked Questions (FAQs)

### Q1. Why is my Brother printer completely dead with no lights?

This usually means:

* No power is reaching the printer
* The power supply unit has failed
* The internal board is damaged

Try another power outlet and cable first.

**Call Printer Tales at 1-866-203-7571**

### Q2. Can a power surge damage my Brother printer?

Yes. Power surges can destroy internal components. Always use a surge protector after the printer is working again.

**Call Printer Tales at 1-866-203-7571**

### Q3. How long should a Brother printer last?

With proper care, most Brother printers last **5–7 years**. Power issues can shorten their lifespan if not fixed early.

**Call Printer Tales at 1-866-203-7571**

### Q4. Is it worth repairing a Brother printer that won’t turn on?

If your printer is:

* Less than 3–4 years old → Repair is usually worth it
* Older than 6 years → Replacement may be more cost-effective

Call **1-866-203-7571** for expert advice.

**Call Printer Tales at 1-866-203-7571**

## Preventing Power Issues in the Future

Once your Brother printer is working again, follow these tips:

* Always use a **surge protector**
* Avoid plugging into overloaded power strips
* Turn off the printer properly after use
* Keep it away from moisture and dust

**Call Printer Tales at 1-866-203-7571**

## Conclusion

A Brother printer that won’t turn on can be frustrating, but most power issues are caused by simple things like bad cables, faulty outlets, or internal glitches. By following these **4 quick fixes**, you can often bring your printer back to life in just a few minutes.

If the problem persists, don’t waste time guessing.

📞 **Call Printer Tales at 1-866-203-7571**
Our experts are ready to help you get your Brother printer up and running again—fast and hassle-free.