# 1-866-203-7571 How to Fix Canon MG2522 Not Printing Issue?
**Support / Helpline: 1-866-203-7571**
When your Canon MG2522 printer stops printing, it can be frustrating—especially when you need urgent documents or photos. The good news: most printing issues are caused by common, fixable problems such as connectivity, drivers, settings, or hardware conditions. This guide will walk you through everything you need to get your printer working again.
**Support / Helpline: 1-866-203-7571**
## **Table of Contents**
1. Introduction
2. Why Canon MG2522 Stops Printing
3. Basic Troubleshooting (Quick Fixes)
4. Detailed Step-by-Step Solutions
* Check Printer Power & Setup
* Connection Troubleshooting (USB / Wi-Fi)
* Printer Queue & Spooler System
* Driver & Software Problems
* Paper & Ink Cartridge Checks
* Alignment & Calibration
5. Advanced Solutions
* Firmware Updates
* Resetting the Printer
* Operating System-Specific Fixes
6. Preventative Maintenance
7. When to Call Support (1-866-203-7571)
8. FAQs
9. Conclusion
**Support / Helpline: 1-866-203-7571**
# **1. Introduction**
The Canon PIXMA MG2522 is a reliable all-in-one printer widely used for home and small office printing. However, like all devices, it can experience issues—especially printing failures. Understanding why the printer won’t print and knowing how to fix it can save time, effort, and money.
Whether your printer is not printing anything, printing blank pages, showing errors, or printing slowly, this guide breaks down the troubleshooting process in easy-to-follow steps.
**Support / Helpline: 1-866-203-7571**
# **2. Why Canon MG2522 Stops Printing**
Here are the **most common causes** why your Canon MG2522 might refuse to print:
* **Connection issues** (USB not connected properly)
* **Outdated or corrupt printer drivers**
* **Incorrect printer settings**
* **Ink cartridge problems**
* **Paper jams or improper paper loading**
* **Printer queue errors**
* **Operating system conflicts**
* **Firmware bugs**
* **Hardware faults**
Each of these will be addressed in the solutions below.
**Support / Helpline: 1-866-203-7571**
# **3. Basic Troubleshooting (Quick Fixes)**
Before diving into complex solutions, try these quick fixes:
✅ Turn the printer OFF, wait 30 seconds, then turn it back ON
✅ Unplug and reconnect the USB cable
✅ Restart your computer
✅ Ensure paper is loaded correctly
✅ Check ink levels and replace cartridges if empty
✅ Clear the printer queue
Often, one of these simple actions restores printing within minutes.
**Support / Helpline: 1-866-203-7571**
# **4. Detailed Step-by-Step Solutions**
## **A. Check Printer Power & Setup**
Make sure your printer is physically ready:
✔ Ensure the printer is plugged into power and switched ON
✔ Check that the power indicator light is solid (not blinking)
✔ Make sure the paper tray has paper loaded correctly
✔ Ensure no error lights are showing on the printer panel
If lights are flashing, refer to the manual to interpret the error code.
**Support / Helpline: 1-866-203-7571**
## **B. Connection Troubleshooting**
### **USB Connection**
1. Turn OFF the printer and computer.
2. Unplug the USB cable from both devices.
3. Reconnect to a different USB port on your computer.
4. Power ON both devices.
If the cable is damaged or loose, try another high-quality USB cable.
**Support / Helpline: 1-866-203-7571**
### **Wireless / Network Printing (if Applicable)**
Although Canon MG2522 is primarily a USB printer, if you are using any print sharing tool or adapter:
✔ Make sure Wi-Fi is connected
✔ Ensure your computer and printer are on the same network
✔ Disable any VPN temporarily (VPNs can block local printing)
**Support / Helpline: 1-866-203-7571**
## **C. Printer Queue & Print Spooler**
At times, the print job gets “stuck” in the queue:
### On Windows:
1. Open **Control Panel** > **Devices and Printers**
2. Find Canon MG2522 icon
3. Right-click > **See what’s printing**
4. Select all jobs > **Cancel**
5. Turn printer OFF and ON
6. Re-send your print job
### Restart Print Spooler:
1. Press **Windows + R**
2. Type: **services.msc**
3. Find **Print Spooler**
4. Right-click > **Restart**
**Support / Helpline: 1-866-203-7571**
## **D. Drivers & Software Problems**
Outdated or corrupt drivers are a leading cause of printing problems.
### **Update or Reinstall Drivers**
### On Windows:
1. Disconnect the printer
2. Go to **Settings > Devices > Printers & scanners**
3. Remove Canon MG2522
4. Visit the official Canon support website
5. Download the latest driver for your OS
6. Install it and reconnect the printer
If you can’t find drivers, call support at **1-866-203-7571** for assistance in obtaining the correct software.
### **Check for Software Conflicts**
✔ Turn off firewall or antivirus temporarily
✔ Try printing again
✔ If it works, adjust firewall settings to allow Canon printer
**Support / Helpline: 1-866-203-7571**
## **E. Paper & Ink Cartridge Checks**
### **Paper Jams**
Even tiny bits of paper can block printing:
1. Open the rear cover and front tray
2. Slowly remove any jammed paper
3. Check for tiny scraps stuck inside
Tip: Avoid pulling paper abruptly—this can tear it and leave pieces inside.
**Support / Helpline: 1-866-203-7571**
### **Ink Cartridges**
If your Canon MG2522 is printing blank pages:
✔ The ink may be empty or clogged
✔ The cartridge may not be seated properly
#### **Check Ink Levels**
1. Open the printer cover
2. Check ink cartridges’ ink levels manually
3. If empty or low, replace them
#### **Clean Print Head**
Clogged print heads can prevent ink from flowing:
1. Use the Canon utility software
2. Run **Print Head Cleaning**
3. Repeat if needed
Most Canon printers have software tools to clean and align cartridges.
**Support / Helpline: 1-866-203-7571**
## **F. Alignment & Calibration**
If prints are skewed, blurry, or misaligned:
1. Open the Canon printer software
2. Go to **Maintenance**
3. Select **Print Head Alignment**
4. Follow on-screen instructions
Correcting alignment ensures clean and accurate printing.
**Support / Helpline: 1-866-203-7571**
# **5. Advanced Solutions**
## **A. Firmware Updates**
Firmware is the internal software inside your printer. Outdated firmware can cause performance issues.
✔ Visit the Canon support site
✔ Check for MG2522 firmware updates
✔ Follow instructions to install updates
Note: Firmware upgrades sometimes require a USB connection.
**Support / Helpline: 1-866-203-7571**
## **B. Resetting the Printer**
A reset can fix internal errors:
1. Turn OFF the printer
2. Press and hold the **Resume/Cancel** button
3. While holding, turn the printer ON
4. Keep holding for 10–15 seconds
5. Release and restart
This returns settings to default and can clear persistent errors.
**Support / Helpline: 1-866-203-7571**
## **C. Operating System-Specific Fixes**
### **Windows Issues**
✔ Update Windows
✔ Run Windows Troubleshooter
✔ Check Windows Update for printer patches
### **Mac Issues**
✔ Reset printing system:
* System Preferences > Printers & Scanners
* Right-click > **Reset printing system**
* Re-add Canon MG2522
**Support / Helpline: 1-866-203-7571**
# **6. Preventative Maintenance**
Keeping your printer in good health prevents errors:
### **Daily / Weekly Tips**
✔ Use the printer regularly
✔ Turn it OFF properly (don’t just unplug)
✔ Keep lid and paper tray closed to avoid dust
✔ Use high-quality paper
### **Ink & Print Head Care**
✔ Avoid letting ink cartridges run completely dry
✔ Run print head cleaning periodically
✔ Store extra cartridges properly
### **Software Care**
✔ Update drivers when OS updates
✔ Avoid third-party print utilities that conflict
**Support / Helpline: 1-866-203-7571**
# **7. When to Call Support (1-866-203-7571)**
If you’ve tried all the steps above and still have issues, it’s time to get professional help.
📞 **Canon MG2522 Support & Technical Assistance: 1-866-203-7571**
You should call support when:
✔ Printer still won’t print anything
✔ Printer shows strange error codes
✔ Hardware components (like print head or rollers) are damaged
✔ You suspect a motherboard or internal hardware fault
Support technicians can guide you through advanced diagnostics, replace parts, or arrange service.
**Support / Helpline: 1-866-203-7571**
# **8. Frequently Asked Questions (FAQs)**
### **Q1. Why does my printer show “Offline”?**
A: It could be a connection issue. Restart printer and computer, check USB cable, reinstall drivers.
---
### **Q2. Why are my prints blank or faded?**
A: Ink cartridges may be empty or clogged. Replace cartridges or run print head cleaning.
---
### **Q3. Why is the printer not responding to print commands?**
A: Print queue issues, outdated drivers, or USB problems could be the cause. Clear the queue, update drivers, and reattach the USB.
**Support / Helpline: 1-866-203-7571**
### **Q4. Does Canon MG2522 work with wireless printing?**
A: The MG2522 is typically a USB printer. Wireless will require additional hardware or shared network printing.
**Support / Helpline: 1-866-203-7571**
### **Q5. What if the printer prints but with poor quality?**
A: Run cleaning and alignment. Use good quality paper and fresh ink.
**Support / Helpline: 1-866-203-7571**
# **9. Conclusion**
Printer issues can be annoying, but most Canon MG2522 not printing problems are fixable with simple steps. Whether it’s connectivity, drivers, ink, or settings issues, this guide walks you through every possibility.
🛠 **Summary of Key Steps to Fix Canon MG2522 Not Printing**
1. Check power and connections
2. Clear print queue and restart spooler
3. Update/reinstall drivers
4. Verify paper and ink cartridges
5. Clean print heads and align cartridges
6. Update firmware
7. Reset printer if needed
📞 **When in doubt, professional help is available at: 1-866-203-7571**
Sign in with Wallet
Connect another wallet