---
# System prepended metadata

title: Brother HL-L2300D Printer

---

# Brother HL-L2300D Printer Toner Reset
![hl-l2300d-printer-toner-reset](https://hackmd.io/_uploads/rJjG89Nwbl.jpg)


All of a sudden, your Brother HL-L2300D is displaying a “Toner Low” or “Replace Toner” message, even though you aren’t running low on toner. A quick reset of your Brother HL-L2300D Printer Toner may resolve this issue. 

Resetting is a practical way to fix the error, but you must be mindful of a few things. Common issues may arise when performing the reset. The toner reset doesn’t work even after applying the steps correctly. The “Replace Toner” or “Toner Low” message still shows up. Using an incompatible or non-genuine toner cartridge or firmware updates is blocking the manual reset. 

Here is how to perform the reset of your Brother HL-L2300D: 

* Remove the printer’s power cable from the outlet. 
* Open the front cover. 
* Slide out the drum and toner unit.
* Press and hold the green button on the printer. 
* Plug the power cord into the outlet. 
* Check whether the Toner, Drum, and Paper lights flash. 
* Press and hold the green button for 10 seconds. 
* Leave the button and press it nine times. 
* Check whether the Toner, Drum, and Paper lights flash again after going off.
* Press the green button 5 times. 
* Reinstall the toner unit.
* Close the front cover.
* Wait for your toner to reset.

Source:- [Brother HL-L2300D Printer Toner Reset](https://printertales.com/knowledgebase/hl-l2300d-printer-toner-reset)