# Printer Keeps Saying “Update in Progress”? Here’s How to Fix It Fast

## 📞 Need immediate help? Call 1-888-765-0492 now and let printer experts handle it for you.
Is your printer stuck on “Update in Progress” and refusing to print anything? You’re not alone. This is one of the most frustrating printer problems—especially when you urgently need documents and the printer just won’t move past the update screen.

The good news? In most cases, this issue can be fixed at home with a few simple troubleshooting steps. In this guide, we’ll explain why this happens, how to fix it, and when to call professional printer support.
## Why Does My Printer Say “Update in Progress” Forever?
Printers regularly install firmware updates to improve performance, security, and compatibility. However, the update process can get stuck due to:

* Interrupted internet connection
* Power outage during update
* Corrupt firmware download
* Low memory or internal errors
* Printer left idle for too long during update
* Compatibility issues after a recent OS update

When this happens, the printer may freeze on:

* “Updating firmware”
* “Please wait… update in progress”
* “Do not turn off printer”
* Even waiting for hours won’t fix it in most cases.

## Quick Checks Before You Start Troubleshooting
Before moving to advanced steps, try these basics:

* Wait 10–15 minutes (some updates are slow)
* Check if the printer screen is changing at all
* Make sure the printer is not actively making noise
* Confirm there’s no blinking error light

If nothing changes, move on to the fixes below.
## Fix 1: Restart the Printer (Power Reset)

This is the simplest and often the most effective solution.

Steps:

Turn off the printer

Unplug the power cable from the wall

Wait 60 seconds

Plug it back in and turn the printer on

👉 If the update resumes or completes, great.
👉 If it gets stuck again, continue to the next step.
## Fix 2: Restart Your Computer and Internet Router

A weak or interrupted connection can corrupt the update process.

What to do:

Restart your Wi-Fi router

Restart your computer

Ensure stable internet (avoid mobile hotspots)

Reconnect the printer to Wi-Fi if needed

Once everything is stable, check the printer screen again.
## Fix 3: Cancel the Stuck Update (If Possible)

Some printers allow you to cancel or reset updates.

Look for options like Cancel, Back, or Reset on the printer panel

If there’s a touchscreen, navigate to Settings > Maintenance > Reset

⚠️ Not all printers allow this. If there’s no option, don’t force it—move on.
## Fix 4: Update Printer Firmware Manually

If the automatic update failed, manual installation often works.

Steps:

Open your printer’s official software on your computer

Go to Settings > Firmware Update

Choose Manual Update

Follow on-screen instructions carefully

Do NOT turn off the printer during this process

This can take 5–10 minutes.
## Fix 5: Reinstall Printer Software and Drivers

Corrupt drivers can cause update loops.

How to reinstall cleanly:

Remove the printer from Devices & Printers

Uninstall printer software from your computer

Restart your system

Download the latest printer software

Re-add the printer and complete setup

Once reinstalled, check if the update completes.
## Fix 6: Factory Reset the Printer (Advanced)

If nothing works, a factory reset may clear the update error.

⚠️ This will erase saved settings and Wi-Fi info.

General steps (varies by model):

Go to Settings > Restore Defaults

Or hold Cancel + Power buttons (model-specific)

If you’re unsure, do not guess—you could make it worse.
## When to Stop Troubleshooting and Call Support

You should contact professional printer support if:

The printer is frozen for hours

Screen shows “Update Failed” repeatedly

Printer won’t power on normally

Firmware update stops at the same percentage

Printer is stuck in a reboot loop

At this point, expert help saves time and prevents permanent damage.
## 📞 Get Instant Printer Support (Recommended)

If your printer is still stuck on “Update in Progress”, don’t waste hours troubleshooting.

👉 Call Printer Support Now: 1-888-765-0492

Why call?

Live printer experts

Step-by-step guided fixes

Firmware & update error specialists

Support for all major printer brands

Fast resolution without replacing your printer

📞 1-888-765-0492 — Get your printer working again today.
## Frequently Asked Questions (FAQs)

Q1. How long should a printer update take?
Usually 5–15 minutes. Anything longer may indicate a problem.

Q2. Is it safe to turn off a printer during an update?
No. Turning it off mid-update can corrupt firmware unless instructed by support.

Q3. Why does my printer update keep restarting?
This usually means a failed or corrupted firmware installation.

Q4. Will factory reset fix update issues?
Sometimes, but it should be done carefully or with expert guidance.
A printer stuck on “Update in Progress” can feel like a nightmare—but it’s usually fixable. Start with simple resets, ensure stable internet, and avoid forcing the update. If the issue persists, professional support is the safest and fastest solution.

📞 Need immediate help? Call 1-888-765-0492 now and let printer experts handle it for you.