# How to Fix Purple Light on Orbi Router?
It is perfectly normal to feel a bit stressed out over the **[purple light of Orbi](https://orbismartwifi.com/orbi-purple-light-what-does-it-mean-how-to-fix-it/)**, but do not fret. This is a very frequent issue among Orbi users and, most of the time, it means that your router has some problems with the internet connection. True, it is a bit tricky but still, there are some easy steps you can take to fix the problem and get your network back to work again.
**What Does Purple Light Mean?**
Very often the purple light on Orbi signifies one of the two situations:
Your router is not recognizing any internet connection.
Your Orbi router and modem are not properly configured or set up.
**1. Check Your Internet Connection**
Before resorting to complicated solutions, ensure that your modem is connected to the internet. This can be done by connecting a device directly to the modem using an Ethernet cable and checking for internet access. If there is no internet, you might have to contact your ISP.
**2. Reboot Your Modem and Orbi**
Sometimes a simple reboot is all that it takes. Turn off your Orbi router and modem, wait at least one to two minutes, and then power them back on. Check if the purple light on Orbi turns into steady blue or white, which would indicate that it is online.
**3. Confirm the Setup Using the Orbi Router Login**
You can either type the IP address of the router in your browser or visit orbilogin.com to log in. Once you are in the **[Orbi router login](https://orbismartwifi.com/)** dashboard, check if your WAN/Internet settings are correct. You can also run diagnostics to see if the device is recognizing the connection.
**4. Firmware Update**
The purple light issue is sometimes related to firmware that is not up to date. To check whether there is a firmware update, you need to log in first. If there is one, go ahead and retrieve and install it.
**5. Orbi Router Factory Reset**
If nothing of the earlier mentioned solutions is effective, you may have to resort to the **[Factory Reset Orbi Router](https://orbismartwifi.com/step-by-step-guide-to-factory-reset-orbi-router/)** option. The reset button will need to be pressed and held for a few seconds, which will trigger the factory reset. All settings will be erased so you will have to go through the entire process of configuring your network again.
Orbi's purple light is often a temporary issue with settings or connectivity that can be fixed pretty much easily. Basically, you can get your home Wi-Fi back in no time by following the above-mentioned steps: checking your ISP connection, rebooting devices, accessing the router, updating firmware, or performing a factory reset.
For further information, you can visit our website.