# 1-866-203-7571 How to Do Brother HL L2370DW Wi-Fi Setup?
**Call: 1-866-203-7571**
Getting your Brother HL-L2370DW printer connected to your Wi-Fi network is an essential step that enables printing from computers, laptops, phones, and tablets without the fuss of cables. Although it may sound technical, following the instructions below will make the process smooth, clear, and stress-free.
This guide covers:
1. **Overview & Requirements**
2. **Before You Begin**
3. **Wi-Fi Setup Methods**
4. **Step-by-Step Wireless Setup**
5. **Installing Drivers & Software**
6. **Printing from Mobile Devices**
7. **Troubleshooting Tips**
8. **Advanced Settings**
9. **Frequently Asked Questions**
**Call: 1-866-203-7571**
## **1. Overview & Requirements**
The **Brother HL-L2370DW** is a popular wireless monochrome laser printer known for fast printing and reliable performance.
### **Why Wi-Fi Setup Matters**
Connecting your printer to Wi-Fi enables:
* Wireless printing from multiple devices
* Printing from smartphones and tablets
* Easy sharing across a home or office network
* Reduced cable clutter
### **What You’ll Need**
✔ A wireless Wi-Fi network (SSID and password)
✔ A computer, laptop, phone, or tablet
✔ Brother HL-L2370DW printer
✔ Access to your Wi-Fi router
✔ USB cable (only if wireless setup fails)
**Call: 1-866-203-7571**
## **2. Before You Begin**
Before starting the setup, do the following:
### **A. Check Your Wi-Fi Network**
Ensure your Wi-Fi is active and you know:
* **Network name (SSID)**
* **Wi-Fi password**
* Type of network security (WPA2/WPA3 recommended)
### **B. Place the Printer Strategically**
Put the printer:
📌 Within range of your Wi-Fi router
📌 On a stable, flat surface
📌 Away from thick walls and interference
### **C. Power On the Printer**
1. Connect the power cord
2. Press the **Power** button
3. Wait until the Ready light is stable
**Call: 1-866-203-7571**
## **3. Wi-Fi Setup Methods**
There are two primary methods:
1. **Wireless Setup Using WPS (Push Button)**
2. **Wireless Setup Using Printer Control Panel**
3. **Wireless Setup Using USB Temporary Connection**
**Call: 1-866-203-7571**
## **4. Step-by-Step Wireless Setup**
### **Method 1: WPS (Wi-Fi Protected Setup) — Fastest Way**
If your router supports **WPS**, this is the easiest way.
#### **Steps to Use WPS**
1. **Press the WPS button** on your router.
2. Within **2 minutes**, press and hold the **Wi-Fi** button on the Brother HL-L2370DW printer until the Wi-Fi LED flashes.
3. Wait — the printer will connect automatically.
4. When connected successfully, the **Wi-Fi LED will remain solid**.
📌 If this works, skip ahead to **Installing Drivers**.
**Call: 1-866-203-7571**
### **Method 2: Setup Using Printer Control Panel**
#### **Step A — Access Network Menu**
1. On the printer, press the **Menu** button.
2. Use the arrow keys to select **Network**.
3. Press **OK**.
#### **Step B — Select WLAN**
1. Scroll to **WLAN** and press **OK**.
2. Choose **Setup Wizard**.
3. The printer will search for available networks.
#### **Step C — Choose Your Wi-Fi Network**
1. Select your **SSID (Wi-Fi name)** from the list.
2. Press **OK**.
3. Enter your Wi-Fi password — **use the arrow keys and OK to confirm characters**.
4. Press **OK** to begin connection.
#### **Step D — Confirmation**
* When connected successfully, you will see:
**“Connected”** or **“Network Connected”**
* The **Wi-Fi LED will stay ON**.
**Call: 1-866-203-7571**
### **Method 3: USB Temporary Setup**
If wireless setup fails:
1. Connect your printer to a computer with a USB cable.
2. Run the Brother setup utility (on CD or download from Brother support).
3. Select **Wireless Network Setup**.
4. Follow on-screen instructions to configure Wi-Fi.
5. Once done, unplug the USB cable.
**Call: 1-866-203-7571**
## **5. Installing Drivers & Software**
To print from any computer, you need drivers.
### **A. Download Drivers**
1. Visit **support.brother.com**
2. Search for **HL-L2370DW**
3. Choose your operating system (Windows/Mac)
4. Download **Full Driver & Software Package**
### **B. Install on Windows**
1. Run the downloaded file
2. Choose **Wireless Network Connection**
3. Follow on-screen prompts
4. When prompted, the installer will detect your printer on the Wi-Fi network
5. Click **Finish**
### **C. Install on macOS**
1. Open the downloaded package
2. Follow instructions
3. When prompted, select the wireless printer
4. Complete installation
**Call: 1-866-203-7571**
## **6. Printing from Mobile Devices**
### **A. Apple Devices (iPhone/iPad)**
Use **AirPrint** — no additional drivers needed.
1. Ensure your device and printer are on the same Wi-Fi.
2. Open the document/photo.
3. Tap **Share › Print**
4. Select **Brother HL-L2370DW**
5. Tap **Print**
### **B. Android Devices**
Use **Mopria Print Service**:
1. Install **Mopria Print Service** from Google Play
2. Enable it in Settings > Printing
3. Open the file
4. Select **Print**
5. Choose **Brother HL-L2370DW**
### **C. Brother iPrint & Scan App**
Brother’s official app lets you print, scan, and manage the printer easily.
1. Install **Brother iPrint & Scan**
2. Launch the app
3. Select your printer
4. Print photos, documents, scans
**Call: 1-866-203-7571**
## **7. Troubleshooting Common Issues**
Even simple setups can sometimes run into snags. Here’s how to fix them.
---
### **A. “Unable to Connect to Network”**
Possible causes:
❌ Wrong Wi-Fi password
❌ Network name not found
❌ Wi-Fi signal weak
**Solutions:**
✔ Re-enter password carefully
✔ Move printer closer to router
✔ Restart router and printer
✔ Use WPS method if possible
**Call: 1-866-203-7571**
### **B. Wi-Fi LED Keeps Blinking**
Indicates connecting or failed attempt.
**What to do:**
1. Press **Cancel**
2. Restart printer
3. Try setup again
**Call: 1-866-203-7571**
### **C. Printer Not Detected by PC**
Check:
✔ Printer and PC are on the *same Wi-Fi network*
✔ Firewall isn’t blocking access
✔ Drivers are installed properly
**Call: 1-866-203-7571**
### **D. Mobile Printing Not Working**
Ensure:
✔ Device and printer share network
✔ AirPrint/Mopria is enabled
✔ Printer status is ready
**Call: 1-866-203-7571**
### **E. Resetting the Network Settings**
If setup fails repeatedly:
1. Press **Menu**
2. Go to **Network**
3. Select **Reset Network**
4. Confirm
5. Restart wireless setup
**Call: 1-866-203-7571**
## **8. Advanced Printer Settings**
Once connected, you can access the printer’s internal web interface (Web Based Management) for advanced settings.
### **Find Printer IP Address**
1. Press **Menu**
2. Go to **Network**
3. Select **TCP/IP**
4. View IP address
### **Access Web Interface**
1. Open a web browser
2. Type the printer’s IP address
3. Log in (default admin/password)
4. Configure:
* Wi-Fi settings
* Static IP
* Security settings
* Print preferences
**Call: 1-866-203-7571**
## **9. Frequently Asked Questions (FAQs)**
### **Q1: Does HL-L2370DW support 5GHz Wi-Fi?**
No — it connects only to a 2.4GHz Wi-Fi network.
**Call: 1-866-203-7571**
### **Q2: What if my router name (SSID) is hidden?**
You can manually enter the SSID during setup under “Manual SSID Input”.
**Call: 1-866-203-7571**
### **Q3: Can I print without Wi-Fi?**
Yes — using USB cable directly.
**Call: 1-866-203-7571**
### **Q4: Why does it ask for a driver if it’s connected?**
Wi-Fi connects the printer to the network, but your device still needs the proper **driver/software** installed to communicate with it.
**Call: 1-866-203-7571**
### **Q5: What if my phone cannot find the printer?**
Make sure:
✔ Both are on same Wi-Fi
✔ Printer is online
✔ Restart devices
**Call: 1-866-203-7571**
## **10. Quick Reference Setup Checklist**
| Step | Task |
| ---- | ----------------------------------- |
| 1 | Power on printer |
| 2 | Check Wi-Fi network name & password |
| 3 | Try WPS setup |
| 4 | If WPS fails, use Setup Wizard |
| 5 | Install drivers on computer |
| 6 | Test print from a device |
| 7 | Use apps for mobile printing |
**Call: 1-866-203-7571**
## **11. Helpful Tips & Best Practices**
✔ Keep printer firmware updated
✔ Avoid network congestion during setup
✔ Note printer’s IP address for future access
✔ Use WPA2 security for stability
✔ Write down setup steps if you manage multiple printers
**Call: 1-866-203-7571**
## **12. Need Help?**
If at any time the setup process feels overwhelming or you run into problems that aren’t listed here, **professional support is available 24/7** to walk you through the Wi-Fi setup and configuration.
📞 **Call: 1-866-203-7571** — Expert support for Brother printer setup
Technicians can help you with:
✅ Wireless connection guidance
✅ Driver installation support
✅ Mobile printing setup
✅ Troubleshooting errors
✅ Network configuration
**Call: 1-866-203-7571**
## **Conclusion**
Setting up your **Brother HL-L2370DW Wi-Fi** connection doesn’t need to be complicated. With the right steps and clear instructions, you can have it up and running in minutes. This guide walked you through every possible method — including WPS, wireless setup wizard, USB-assisted setup, driver installation, mobile printing, troubleshooting, and advanced configuration.
Remember, the goal is to have a **reliable wireless printing experience**. Take your time, follow the steps carefully, and you’ll be printing wirelessly with confidence.
And if you ever get stuck:
📞 **1-866-203-7571** is available to help you through every step.
Sign in with Wallet
Connect another wallet