---
# System prepended metadata

title: 1-866-203-7571HowtoFixEpsonET2750NotPrintingColor?FixestoTry

---

# 1-866-203-7571 How to Fix Epson ET 2750 Not Printing Color? Fixes to Try

**Epson support at 1-866-203-7571**

The Epson EcoTank ET-2750 is a popular all-in-one printer known for its refillable ink tanks and low running costs. However, like all printers, it sometimes experiences issues — especially when it comes to printing color. If your ET-2750 is **printing only black**, producing **faded colors**, or has **missing color output**, this guide will walk you through every possible fix. You don’t need to be a tech expert — just follow the steps in order until your color printing is restored.

**Epson support at 1-866-203-7571**

## **Why Epson ET-2750 May Not Print Color**

Color printing problems can be caused by a variety of issues:

* Empty or low color ink tanks
* Dried or clogged printhead nozzles
* Incorrect printer settings
* Outdated or corrupt drivers
* Air bubbles or ink flow problems in the ink lines
* Firmware issues
* Hardware defects

We’ll cover each of these in detail and provide step-by-step solutions.

**Epson support at 1-866-203-7571**

## **Safety & Preliminary Checks**

Before attempting any fix:

1. **Turn off your printer** and unplug it from the power source before you begin physical troubleshooting.
2. Make sure hands are dry when handling ink bottles or printer components.
3. Work in a well-lit area with paper towels ready for accidental ink spills.

**Epson support at 1-866-203-7571**

## **Section 1: Check Ink Levels & Refill if Needed**

The Epson ET-2750 uses integrated ink tanks instead of cartridges. If your color tank is low or empty, the printer will not be able to print color.

### **How to Check Ink Levels**

1. Press the **Home** button on the printer.
2. Navigate to **Setup** or **Ink Levels**.
3. You will see color indicators for **Cyan, Magenta, and Yellow**.

If any color tank is low, refill it using Epson-approved ink bottles:

* **Cyan**
* **Magenta**
* **Yellow**

> **Tip:** Always use genuine Epson EcoTank inks to avoid clogging or printhead damage.

**Epson support at 1-866-203-7571**

## **Section 2: Print a Nozzle Check Pattern**

This helps you determine if your printhead nozzles are clogged.

### **Steps to Perform a Nozzle Check**

1. On your printer’s control panel, go to **Setup**.
2. Select **Maintenance**.
3. Choose **Nozzle Check**.
4. Print the pattern.

### **Interpret the Nozzle Check Results**

* **Clear, complete pattern** – no clog; move to settings troubleshooting.
* **Missing lines or faded colors** – indicates clog or ink flow issue.

Continue with the next section if this is the case.

**Epson support at 1-866-203-7571**

## **Section 3: Printhead Cleaning**

Clogged printheads frequently cause color printing issues. Epson printers have built-in maintenance utilities to clean the printhead.

### **Automatic Printhead Cleaning**

1. On printer panel: **Setup** → **Maintenance** → **Head Cleaning**.
2. Follow the on-screen instructions.
3. After cleaning, print another **Nozzle Check**.

You may need to run head cleaning **2–3 times** to clear stubborn clogs.

> **Important:** Head cleaning uses ink — if your color tanks are low, refill before cleaning.

**Epson support at 1-866-203-7571**

## **Section 4: Deep Cleaning & Advanced Printhead Maintenance**

If standard head cleaning fails:

1. **Repeat Head Cleaning again.**
2. Enter **Power Cleaning** (if available on your model).
3. Let the printer complete the cycle — this takes longer but reaches deeper clogs.

**After each cleaning**, print another nozzle check until the pattern looks correct.

**Epson support at 1-866-203-7571**

## **Section 5: Update Printer Drivers & Firmware**

Outdated or corrupted drivers can interfere with color printing.

### **Update Printer Drivers on Windows**

1. Open **Control Panel** → **Devices and Printers**.
2. Right-click **Epson ET-2750** → **Properties**.
3. Click **Update Driver**.
4. Follow updates from Epson.

### **Update Firmware**

You can update firmware from the Epson support site or through Epson’s software utility on your computer.

**Epson support at 1-866-203-7571**

## **Section 6: Check Printer Settings on Your Computer**

Sometimes the problem is not with the printer hardware, but with software settings.

### **Windows**

1. Go to **Control Panel** → **Devices and Printers**.
2. Right-click Epson ET-2750 → **Printing Preferences**.
3. Under **Color**, make sure it’s set to **Color Printing** (not **Black/Grayscale**).

### **Mac**

1. System Preferences → Printers & Scanners.
2. Select Epson ET-2750.
3. Click **Options & Supplies** → **Driver**.
4. Ensure **Color Mode** is enabled.

**Epson support at 1-866-203-7571**

## **Section 7: Align Printhead**

Misalignment can cause colors to shift or print incorrectly.

1. On the printer: **Setup** → **Maintenance**.
2. Select **Printhead Alignment**.
3. Follow steps to align.

This often fixes color banding and misregistration issues.

**Epson support at 1-866-203-7571**

## **Section 8: Reset Printer Settings**

If settings are corrupt:

1. **Turn off** the printer.
2. Hold the **Stop/Reset** button while turning it on.
3. Let it reset to defaults.

After reset, reconfigure network and ensure color settings are enabled.

**Epson support at 1-866-203-7571**

## **Section 9: Clean Ink Tank Caps and Air Vents**

Sometimes air bubbles in the ink lines prevent proper ink flow.

### **How to Fix Air Bubbles**

1. Turn off printer and open ink tank cover.
2. Gently tap on the ink tanks to dislodge bubbles.
3. Use a syringe with soft tube connector to gently pull ink until bubbles are gone (optional and advanced).

**Epson support at 1-866-203-7571**

## **Section 10: Check for Blocked or Dry Ink Lines**

Color ink lines can dry out if unused for long periods.

* Run deep cleaning.
* Keep the printer powered daily.
* Print a color page at least once a week.

**Epson support at 1-866-203-7571**

## **Section 11: Try a Different Computer or App**

Sometimes the problem is with the file or app you’re printing from.

1. Open a different document.
2. Print from a different program, such as Word, Adobe Reader, or even a test photo.
3. If color prints from another application, the first app’s settings may be overriding printer settings.

**Epson support at 1-866-203-7571**

## **Section 12: Test Print from Another Device**

If available:

* Try printing from a smartphone via Wi-Fi.
* Try printing from another computer.

If color prints correctly on another device, then the original device’s drivers or settings are likely at fault.

**Epson support at 1-866-203-7571**

## **Section 13: Epson Support & Expert Help**

If all the above steps fail to restore color printing, there may be a deeper hardware issue. **Call Epson technical support or a professional printer technician:**

📞 **Epson ET-2750 Color Printing Support: 1-866-203-7571**

Trained support can assist with:

* Guided troubleshooting
* Advanced adjustments
* Warranty repair options
* Replacement advice

**Epson support at 1-866-203-7571**

## **Section 14: Common Mistakes to Avoid**

### **Using Third-Party Ink**

Non-Epson inks can cause clogging, damage, or incorrect color output.

### **Skipping Head Cleanings**

Even if prints look okay, regular maintenance helps avoid clogging.

### **Ignoring Firmware Updates**

Firmware often resolves bugs related to printing performance.

### **Not Checking Settings**

Always verify color mode on the print dialog before printing.

**Epson support at 1-866-203-7571**

## **Section 15: Preventive Maintenance for Epson ET-2750**

To keep your printer printing color smoothly:

* Print a color document once a week.
* Keep firmware updated.
* Keep printer powered — frequent on/off can dry printhead.
* Avoid moving printer with ink tanks turned upside down.
* Store ink bottles upright and sealed.

**Epson support at 1-866-203-7571**

## **Section 16: Quick Troubleshooting Checklist (Printable)**

Use this checklist to quickly diagnose and fix color printing issues:

1. ☐ Check color ink levels.
2. ☐ Refill low color tanks.
3. ☐ Print Nozzle Check.
4. ☐ Run Head Cleaning at least 2×.
5. ☐ Update drivers on computer.
6. ☐ Update printer firmware.
7. ☐ Reconfirm “Color Printing” in settings.
8. ☐ Run Power Cleaning.
9. ☐ Align printhead.
10. ☐ Reset printer settings.
11. ☐ Test from another app.
12. ☐ Test from another device.

**Epson support at 1-866-203-7571**

## **Section 17: FAQ (Frequently Asked Questions)**

### **Q1: Why does my printer print black but no color?**

This is usually due to clogged printheads or empty color tanks.

### **Q2: How often should I run head cleaning?**

Only when necessary — every time you see missing lines on nozzle check.

### **Q3: Can old ink cause color issues?**

Yes — ink degrades over time and can clog nozzles.

### **Q4: Is deep cleaning safe?**

Yes, but it uses more ink. Only do deep cleaning after normal cleaning fails.

### **Q5: Why does color printing stop after firmware update?**

Sometimes settings get reset — re-check color settings and drivers.

**Epson support at 1-866-203-7571**

## **Conclusion**

Color printing issues with the **Epson ET-2750** are almost always fixable with the right steps. Start with simple checks like ink levels and print settings, then move to maintenance tasks like head cleaning and driver updates. Regular use and preventive maintenance will greatly reduce future problems.

If you’re stuck at any point, don’t hesitate to reach **Epson support at 1-866-203-7571** for expert assistance.

