# 1-866-203-7571 How to do Brother MFC-J1205W Wireless Setup?
**Brother support at 1-866-203-7571**
Getting your **Brother MFC-J1205W** printer connected to a wireless network allows you to print, scan, and access all functions from your laptop, smartphone, tablet, or desktop — **without cables**. This guide covers everything from unboxing to advanced setup options, multiple wireless methods, troubleshooting, and configuration tips.
**Brother support at 1-866-203-7571**
## **1. Before You Begin — What You’ll Need**
Before starting the wireless setup, make sure you have:
✔️ A wireless router with active Wi-Fi
✔️ Your **Wi-Fi network name (SSID)**
✔️ The **Wi-Fi password (Network Key)**
✔️ The Brother MFC-J1205W printer plugged into power
✔️ A computer, smartphone, or tablet on the same Wi-Fi network
📌 *Note:* You’ll install the drivers/software after wireless setup. It’s usually easier to do this once the printer is connected to Wi-Fi. ([Brother Support][1])
**Brother support at 1-866-203-7571**
## **2. Unbox and Prepare the Brother MFC-J1205W**
Before doing the wireless setup:
### **2.1 Unpack the Printer**
Remove all packaging materials, tapes, and protective films from the printer.
### **2.2 Install Ink Cartridges**
Install the inbox (starter) ink cartridges into their proper slots. The machine will automatically initialize the ink system. ([Manuals+][2])
### **2.3 Load Paper**
Load plain paper into the paper tray. Make sure it is correctly aligned.
### **2.4 Turn On the Printer**
Press the power button and wait until the setup process completes. The printer will finish its startup cycle and may print a test sheet.
**Brother support at 1-866-203-7571**
## **3. Wireless Setup Options**
There are **three principal ways** to get your Brother MFC-J1205W connected to a wireless network:
1. **WPS Push-Button Method (Quickest)**
2. **Control-Panel Wireless Setup Wizard**
3. **Brother Mobile Connect App**
4. **Using a Computer with Brother Software**
We’ll go through each method in detail.
**Brother support at 1-866-203-7571**
## **4. Method 1 — Wireless Setup with WPS Push Button (Easy)**
If your Wi-Fi router **supports WPS (Wi-Fi Protected Setup)**, this is often the **fastest and simplest method**:
### **Step-by-Step: WPS Setup**
1. **Power on the Printer**
Confirm the printer is on and idle.
2. **Activate Wireless Mode on Printer**
Press the **Wi-Fi button on the printer’s control panel 3 times**.
→ The **Wi-Fi LED will start blinking**, meaning the printer is searching for wireless setup. ([Brother Canada Support][3])
3. **Press the WPS Button on Your Router**
Within **2 minutes**, press the **WPS button** on your router.
→ This tells the router to connect devices automatically.
4. **Wait for Connection**
If successful, both the **Power LED** and **Wi-Fi LED** will stay **steady** (not blinking). This means the printer has joined your Wi-Fi network. ([Brother Canada Support][3])
✔️ **Tip:** If the Wi-Fi LED continues to blink or doesn’t light up, repeat the steps or try a different method below.
**Brother support at 1-866-203-7571**
## **5. Method 2 — Wireless Setup Wizard on Printer Panel**
If your router does *not* have WPS, or you prefer manual input:
### **Step-by-Step: Wireless Setup Wizard**
1. **Enter Wireless Setup Mode**
Press and **hold the Wi-Fi button for 2-3 seconds** until the Wi-Fi light starts blinking.
2. **Access the Network Menu**
On the printer panel, use the **Menu** button (or navigate with arrow keys, if available) to choose:
➤ **Network** → **WLAN** → **Setup Wizard** ([TheConnectionLine][4])
3. **Select Your Wireless Network (SSID)**
The printer will scan for all available Wi-Fi networks nearby. Choose your network from the list.
4. **Enter Your Wi-Fi Password**
Use the control panel to enter your network’s password. Input is case-sensitive.
5. **Confirm and Connect**
Press **OK** to confirm. The machine will attempt to connect to the network.
When the connection succeeds, the Wi-Fi LED becomes **solid** (usually green).
✔️ **Note:** If you don’t see your network name (hidden SSID), choose “Enter SSID Manually” and type the exact network name.
**Brother support at 1-866-203-7571**
## **6. Method 3 — Wireless Setup Using Brother Mobile Connect App**
For smartphones or tablets, Brother offers a simple setup app:
### **Step-by-Step: Mobile App Setup**
1. **Download and Install App**
➤ Android: Google Play
➤ iPhone/iPad: App Store
Search for **Brother Mobile Connect** and install it. ([Brother Support][5])
2. **Open the App**
Launch Brother Mobile Connect on your device.
3. **Add Printer**
Tap **Add Printer** or **Set Up a New Printer**.
4. **Follow On-Screen Instructions**
The app will guide you through connecting your MFC-J1205W to your Wi-Fi network.
5. **Select Your Wi-Fi and Enter Password**
Choose the correct SSID and enter the wireless password.
6. **Completion**
Once connected, the app will confirm that the printer is now online.
👉 This method is especially helpful if your printer display or navigation is limited.
**Brother support at 1-866-203-7571**
## **7. Method 4 — Using a Computer (Windows / macOS)**
If you prefer doing setup from a computer:
### **Windows Setup**
1. **Download Full Driver & Software Package**
Go to Brother’s support site, search for *MFC-J1205W*, and download the full driver/setup installer. ([Brother Support][1])
2. **Run the Installer**
Launch the installer and follow on-screen instructions.
3. **Choose Wireless Network Connection**
When asked, select **Wireless Network (Wi-Fi)** as the connection type.
4. **Select Your Wi-Fi Network**
Pick your SSID and enter the password.
5. **Complete the Installation**
Follow the prompts to finish installing drivers and optional utilities.
**Brother support at 1-866-203-7571**
## **8. Common Setup Issues & Troubleshooting**
Even with clear steps, wireless setup sometimes runs into issues. Here are top troubleshooting tips:
### **8.1 Printer Not Found / Wi-Fi LED Not Lit**
✔️ Make sure your wireless router is **turned on** and broadcasting.
✔️ Confirm you entered the **correct Wi-Fi password** (case-sensitive). ([ManualsLib][6])
✔️ Move the printer **closer** to the router to avoid weak signals.
**Brother support at 1-866-203-7571**
## **8.2 Router Doesn’t Support WPS**
Not all routers support WPS. If yours does not:
➡️ Use the **Wireless Setup Wizard** method or the **Mobile Connect App** described above.
**Brother support at 1-866-203-7571**
## **8.3 Password Rejected / Cannot Connect**
✔️ Verify the password by logging into another device.
✔️ Restart your router and printer, then try again.
**Brother support at 1-866-203-7571**
## **8.4 Printer Still Not Connecting**
In rare cases:
📌 Try resetting the network settings on the printer — this clears old Wi-Fi info and restores defaults.
📌 Unplug the power for 1 minute, then restart both printer and router.
📌 Contact support at **1-866-203-7571** for expert help.
**Brother support at 1-866-203-7571**
## **9. How to Confirm Wireless Connection**
Once setup completes:
✔️ Wi-Fi LED should be **solid ON**, not blinking.
✔️ Your printer now appears in your **Devices list** on your computer.
✔️ Try printing a test page from your computer or phone.
**Brother support at 1-866-203-7571**
## **10. Post Setup Tips & Optimization**
### **10.1 Install Brother Utilities**
Install Brother apps like **Brother iPrint&Scan** for advanced control, scanning from devices, and maintenance tools.
**Brother support at 1-866-203-7571**
### **10.2 Set Static IP (Optional)**
Assigning a fixed IP address through your router’s DHCP settings helps your computer always find the printer — useful if network devices reboot often.
**Brother support at 1-866-203-7571**
### **10.3 Mobile Printing**
After you connect:
✔️ Use **AirPrint** (iOS) or **Mopria** (Android) for direct printing without installing apps.
✔️ Or, continue using **Brother Mobile Connect** or **iPrint&Scan** apps.
**Brother support at 1-866-203-7571**
## **11. Security & Network Configuration Notes**
📌 Always use **secure Wi-Fi encryption** (WPA2-Personal or WPA3).
📌 Avoid older security modes like WEP.
📌 Make sure your router is set to **2.4 GHz Wi-Fi** for best range. Some Brother printers have issues with 5 GHz only networks. ([TheConnectionLine][4])
**Brother support at 1-866-203-7571**
## **12. Extra Tips to Prevent Future Wireless Issues**
### **12.1 Router Name and Password**
Keep the SSID and password **simple and known**.
### **12.2 Firmware Updates**
Check Brother support for printer firmware updates to improve connectivity.
### **12.3 Nearest Network Band**
Printers typically work best on the **2.4 GHz** band — even if your router supports 5 GHz.
**Brother support at 1-866-203-7571**
## **13. Conclusion**
Setting up the **Brother MFC-J1205W** on a wireless network can be straightforward — especially if you use the WPS button, the Wireless Setup Wizard, or the Brother Mobile Connect app. Each method empowers you to connect the printer to your home or office Wi-Fi.
Following this guide should give you a complete connection, but if you hit any snags, don’t hesitate to call **Brother support at 1-866-203-7571** for step-by-step assistance.
Sign in with Wallet
Connect another wallet