# 1-866-203-7571 How Do You Connect the Brother Hl 2270dw Printer to Wi-Fi?
**Need help? You can contact support at **1-866-203-7571**
The **Brother HL-2270DW** is a popular monochrome laser printer that supports wireless networking. Once connected to your Wi-Fi network, you can print from laptops, desktops, tablets, and even mobile phones without needing a USB cable tied to a single device. However, because this model is an older printer with a limited control panel, connecting it wirelessly can be tricky without the right steps.
This guide will walk you through **every method of wireless setup** — from **Wi-Fi Protected Setup (WPS)** to **manual network configuration**, installing drivers on **Windows and macOS**, verifying your connection, troubleshooting common errors, and optimizing your workflow.
**Need help? You can contact support at **1-866-203-7571**
## **Before You Begin — What You Need**
Before starting, gather the following:
1. **Brother HL-2270DW Printer**
— Powered on and in a ready state.
2. **Active Wi-Fi Network (2.4 GHz)**
— Most older printers, including the HL-2270DW, only support 2.4 GHz, *not 5 GHz* networks.
3. **Wi-Fi Network Name (SSID) and Password**
— Exactly correct (case-sensitive).
4. **Computer, Laptop, or Mobile Device**
— Connected to the same Wi-Fi network you want the printer to join.
5. **(Optional) USB Cable**
— Useful for manual configuration if Wi-Fi setup doesn’t work.
6. **Brother Full Driver & Software Package**
— Download from Brother’s support site, or install from CD, for your operating system.
**Need help? You can contact support at **1-866-203-7571**
## **Part 1 — Understanding the HL-2270DW Wireless Connection Methods**
You can connect this printer to your wireless network in **three main ways**:
### ✅ **Method A — WPS (Wi-Fi Protected Setup) — Recommended**
If your router supports **WPS**, this is the easiest method — no need to enter SSID or password manually. ([HackMD][1])
### ✅ **Method B — Wireless Setup via USB Cable (Software Wizard)**
Connect the printer to a computer with a USB cable and use Brother’s setup wizard to configure Wi-Fi. ([HackMD][1])
### ✅ **Method C — Manual Wireless Configuration from the Printer Panel or IP Web Interface**
Used when WPS isn’t available and USB setup isn’t practical — sometimes done through network printing reports or printer IP settings. ([ManualsLib][2])
**Need help? You can contact support at **1-866-203-7571**
## **Part 2 — Method A: Connect Using WPS (Automatic Wireless Setup)**
### **What Is WPS?**
**WPS (Wi-Fi Protected Setup)** is a feature on many routers that allows devices to connect without entering a Wi-Fi password manually. If your router has a **WPS button**, you can use this method. ([Brother UK][3])
### **Step-by-Step — WPS Button Method**
1. **Locate the WPS Button on Your Router**
— It may be labeled “WPS” or have a circular arrow icon.
2. **Turn on the Brother HL-2270DW Printer**
— Press the power button and wait until the printer is ready.
3. **Put the Printer in WPS Setup Mode:**
— Press and hold the **Wi-Fi button** (or wireless setup button) on the printer for **about 10 seconds** until the wireless light starts blinking rapidly. ([HackMD][1])
4. **Press the WPS Button on Your Router:**
— Within **2 minutes** of starting the printer’s wireless setup mode, press the **WPS button** on your router.
5. **Wait for the Printer to Connect:**
— The printer will search for the router. Once connected successfully, the wireless indicator should become **solid green**. ([HackMD][1])
6. **Confirm Connection:**
— You can print a network configuration page to confirm the Wi-Fi connection. Hold down the **GO** button until the LEDs light, release it, then press it once more.
### **Why WPS Might Fail**
* Your router might not support WPS.
* WPS may be disabled in your router’s settings.
* You may have pressed the buttons out of sync. Try again.
If WPS fails, continue to **Method B** or **Method C**.
**Need help? You can contact support at **1-866-203-7571**
## **Part 3 — Method B: Wireless Setup Using USB and Software**
### **Why Use USB Setup?**
If your router **doesn’t support WPS** (common on newer mesh routers or enterprise-grade equipment), you can set up the Wi-Fi connection using your computer and a USB cable. ([HackMD][1])
### **Step-by-Step — USB Wireless Setup**
1. **Connect the Printer to Your Computer Using a USB Cable**
— Plug one end into the printer and the other end into your computer.
2. **Download and Install the Brother Full Driver & Software Package**
— Visit the official Brother support page or insert the installation CD.
— Run the installer and follow the on-screen instructions. ([Adorama][4])
3. **When Prompted, Choose Wireless Network Connection**
— The software wizard will ask, “What type of connection do you want?”
— Choose **Wireless**, then **Next**.
4. **Select Your Wi-Fi Network**
— A list of available SSIDs will appear.
— Select your network and enter the **Wi-Fi password**.
5. **Apply Settings and Complete Setup**
— The setup wizard will push the network settings to the printer via USB.
— Once complete, unplug the USB cable.
6. **Print a Test Page**
— Use the printing test feature to confirm your printer is connected to Wi-Fi.
**Need help? You can contact support at **1-866-203-7571**
## **Part 4 — Method C: Manual Wireless Configuration**
If both WPS and USB wizard methods fail, there are **manual options** that use printed reports or an IP configuration tool:
### **Option 1 — PIN Method of Wi-Fi Protected Setup**
Some routers support a PIN method where the printer prints a PIN which you then enter into the router’s admin interface. ([Manual Machine][5])
1. Press the wireless setup button on the printer until it prints a report with an **8-digit PIN**.
2. Log into your **router’s web admin page**.
3. Go to the **WPS settings page** and input the PIN.
4. Submit and wait for the printer to connect.
**Need help? You can contact support at **1-866-203-7571**
### **Option 2 — Printer’s Network Configuration Report**
1. Press and hold the **GO** button until all LEDs light up.
2. Release, then **press once** to print a report.
3. The report shows the **IP address** of the printer if already connected.
If IP is present but not connected properly, you can:
* Open your browser and enter the printer’s IP to access a **web admin panel**.
* Change wireless settings directly.
This is advanced and used mostly by experienced network users. ([ManualsLib][2])
**Need help? You can contact support at **1-866-203-7571**
## **Part 5 — Installing Drivers and Adding the Printer on Your Devices**
### **Windows (All Versions)**
1. Open **Control Panel → Devices and Printers**.
2. Click **Add a Printer**.
3. Choose **Brother HL-2270DW** from the list.
4. Follow the wizard to complete installation.
Make sure your PC is on the same Wi-Fi network as the printer.
**Need help? You can contact support at **1-866-203-7571**
### **macOS (MacBooks / iMacs)**
1. Open **System Preferences → Printers & Scanners**.
2. Click the **“+”** to add a new printer.
3. Select **Brother HL-2270DW**.
4. Click **Add** and follow the on-screen steps.
You may need to download the latest drivers from Brother’s site if the OS doesn’t automatically find them.
**Need help? You can contact support at **1-866-203-7571**
### **Mobile Devices — iPhone / iPad / Android**
* **Install Brother iPrint&Scan App** (free from App Store / Google Play).
* Ensure your phone is on the same Wi-Fi.
* Open the app and **add the HL-2270DW**.
* Print or scan directly from your device.
**Need help? You can contact support at **1-866-203-7571**
## **Part 6 — Troubleshooting & Tips**
Even with detailed steps, you may encounter problems. Below are the most common issues and solutions:
### ❌ **Printer Doesn’t See Your Wi-Fi Network**
* Make sure you are broadcasting a **2.4 GHz network** (many printers do not support 5 GHz). ([Reddit][6])
* Move the printer closer to the router.
* Check if your router SSID is hidden — unhide temporarily.
**Need help? You can contact support at **1-866-203-7571**
### ❌ **WPS Setup Fails**
* Some routers disable WPS for security.
* Try enabling WPS in router settings.
* Use Method B or C instead.
**Need help? You can contact support at **1-866-203-7571**
### ❌ **Connected But Computers Cannot Print**
* Make sure your **computer is connected to the same Wi-Fi**.
* Restart devices (printer and router).
* Re-install drivers.
**Need help? You can contact support at **1-866-203-7571**
### ❌ **Printer Drops Connection After Setup**
* Assign a **static IP address** in your router for the printer (optional).
* Check if your router has a firewall blocking local network access.
* Firmware updates for your router may help.
**Need help? You can contact support at **1-866-203-7571**
### ❌ **Router Doesn’t Have WPS Button**
* Use **USB setup** or manual configuration.
* Some mesh systems remove WPS — use a temporary USB or Ethernet connection for configuration. ([Reddit][7])
**Need help? You can contact support at **1-866-203-7571**
## **Part 7 — Conclusion**
Connecting the **Brother HL-2270DW** printer to Wi-Fi can be straightforward if you choose the right method and follow instructions carefully. Here’s a recap:
**Best Methods (in order)**
1. **WPS Setup** — Fastest and easiest if supported.
2. **USB Setup Wizard** — Reliable when WPS isn’t available.
3. **Manual or PIN Setup** — Advanced options if others fail.
Once connected, install your drivers and add the printer to all your devices (Windows, Mac, mobile) for wireless printing. Always ensure your printer and devices are on the **same Wi-Fi network**.
📞 **Need help? You can contact support at **1-866-203-7571** for step-by-step assistance.**
Sign in with Wallet
Connect another wallet