---
# System prepended metadata

title: 1-866-203-7571HowtoFixE4ErrorHPPrinter?

---

# 1-866-203-7571 How to Fix E4 Error HP Printer?

📞 **Contact Printer Support: 1-866-203-7571**

HP printers are widely known for their reliability, high-quality prints, and easy-to-use interface. However, like any electronic device, they can sometimes encounter errors that disrupt normal operation. One of the common issues HP users face is the **E4 error code**. When this error appears on your printer’s display, it typically indicates a **paper jam**, **paper feed issue**, or **incorrect paper size detection**.

The **HP Printer E4 Error** can be frustrating, especially when you need to print important documents. But don’t worry—this issue can be resolved with a few troubleshooting steps.

In this comprehensive guide, we’ll walk you through **everything you need to know about fixing the E4 error on HP printers**, including causes, step-by-step solutions, preventive measures, and when to contact HP Support at **1-866-203-7571** for professional assistance.



## **Understanding the HP Printer E4 Error**

Before diving into the solutions, it’s important to understand what this error means.

The **E4 error** usually occurs when:

* The printer cannot properly detect or feed the paper.
* There’s a paper jam inside the paper path or rollers.
* The paper size set in the printer doesn’t match the paper loaded in the tray.
* There’s debris, torn paper, or dust obstructing the sensors or rollers.

Essentially, the printer is unable to continue printing due to **paper handling or detection issues**.



## **Common Causes of HP Printer E4 Error**

Here are the most frequent causes of the E4 error:

1. **Paper Jam:**
   Small pieces of paper stuck inside the printer can trigger the E4 error.

2. **Incorrect Paper Loading:**
   If the paper is not aligned properly in the tray, the printer might fail to feed it correctly.

3. **Dust or Debris in Rollers:**
   Dust accumulation can prevent the rollers from gripping the paper properly.

4. **Incompatible Paper Type or Size:**
   Using thick or glossy paper that isn’t supported by the printer may cause feed issues.

5. **Worn-out Rollers or Sensors:**
   Over time, rollers can lose traction, leading to paper feed errors.

6. **Software or Firmware Glitches:**
   Occasionally, firmware bugs can cause false paper error signals.



## **Step-by-Step Solutions to Fix the HP Printer E4 Error**

Let’s go through detailed troubleshooting methods to resolve the problem.

---

### **Step 1: Power Cycle the Printer**

The first and simplest step is to **restart your HP printer**. This helps clear temporary glitches.

**How to do it:**

1. Turn off your HP printer.
2. Unplug the power cord from both the printer and the wall outlet.
3. Wait for at least **60 seconds**.
4. Reconnect the power cable and turn the printer back on.
5. Try printing a test page.

If the error disappears, the issue was likely temporary. If not, continue with the next steps.



### **Step 2: Check for Paper Jams**

Paper jams are the most common cause of the E4 error. You’ll need to carefully inspect and clear any jammed paper.

**Follow these steps:**

1. **Turn off the printer** and unplug it for safety.
2. **Open the main access door** or cartridge access area.
3. **Gently remove the ink cartridges** if needed to gain better access.
4. Look inside for **any jammed, crumpled, or torn paper**.
5. Slowly **pull out the jammed paper** using both hands to prevent tearing.
6. Open the **rear access door or duplexer** (if available) and check for stuck pieces of paper.
7. Also, inspect the **input and output trays**.
8. Once all paper is removed, close all access panels and reinstall the ink cartridges.

**Pro Tip:** Use a flashlight to look deep into the printer mechanism for hidden paper fragments.



### **Step 3: Clean the Paper Feed Rollers**

Dust or debris on the rollers can prevent the paper from feeding properly, leading to the E4 error.

**How to clean rollers:**

1. Turn off and unplug the printer.
2. Remove the paper tray.
3. Locate the rubber rollers inside the printer.
4. Use a **lint-free cloth** slightly dampened with distilled water.
5. Gently clean the rollers to remove dust or dirt.
6. Let them dry completely before reassembling.

You can also use a **cleaning page** (a blank sheet moistened slightly) and run it through the printer to clean the rollers internally.



### **Step 4: Verify Paper Type and Size**

Using the wrong type of paper can also trigger the E4 error. HP printers are designed to handle specific paper weights and sizes.

**Steps:**

1. Check the paper loaded in the tray.
2. Ensure it matches the printer’s supported specifications.
3. The paper should not be curled, damp, or too thick.
4. Fan the stack to prevent sheets from sticking.
5. Adjust the **paper width guides** so that they lightly touch the paper without bending it.

After adjusting, try printing again.



### **Step 5: Reset the Printer Settings**

Sometimes the E4 error appears due to incorrect settings or misconfigured paper size detection.

**To reset the printer:**

1. On the printer’s control panel, go to **Setup > Printer Maintenance > Restore Defaults**.
2. Confirm the reset and wait for the printer to reboot.
3. After restarting, reconfigure paper size and tray settings properly.



### **Step 6: Update Printer Firmware**

Outdated firmware may misinterpret sensor data or fail to clear error codes properly.

**To update firmware:**

1. Connect your printer to Wi-Fi or your computer.
2. Visit **HP’s official support website**.
3. Enter your printer model (e.g., HP DeskJet, OfficeJet, ENVY).
4. Download and install the latest firmware update.
5. Restart the printer after the update completes.

This step ensures your printer runs efficiently with the latest bug fixes.



### **Step 7: Perform a Hard Reset**

If the error persists, a **hard reset** can sometimes resolve stubborn issues.

**Here’s how:**

1. Turn on your printer.
2. Disconnect the power cord **while the printer is still ON**.
3. Unplug it from the wall outlet.
4. Wait 60 seconds.
5. Reconnect the power cord to the outlet and the printer.
6. Power it on and check if the E4 error is gone.



### **Step 8: Check the Ink Cartridges**

Sometimes the E4 error appears due to **cartridge misalignment or installation issues**.

**Steps to inspect:**

1. Open the cartridge access door.
2. Remove the cartridges carefully.
3. Wipe the **electrical contacts** with a lint-free cloth slightly dampened with distilled water.
4. Reinstall the cartridges firmly until you hear a click.
5. Close the door and try printing again.



### **Step 9: Run HP Printer Diagnostic Tool**

HP provides software utilities like **HP Print and Scan Doctor** that automatically detect and fix common printer issues.

**How to use it:**

1. Download “HP Print and Scan Doctor” from the HP official website.
2. Install and open the tool.
3. Select your printer model.
4. Click **Start** to begin diagnosis.
5. Follow on-screen instructions to resolve detected problems.

This automated tool can save you time by fixing paper feed and sensor-related errors.



### **Step 10: Test Printing**

After completing all steps above, it’s time to test your printer:

1. Load paper correctly in the tray.
2. Print a **test document or alignment page**.
3. Check whether the E4 error reappears.

If printing works smoothly, your issue is resolved.



## **Advanced Troubleshooting for Persistent E4 Errors**

If the above steps don’t work, you might be dealing with a **hardware malfunction** or **sensor failure**.

Here’s what you can do:



### **1. Inspect Paper Sensor**

The paper sensor might be dirty or faulty, causing false jam signals.

* Use a compressed air can to gently blow dust around the paper feed area.
* Avoid touching internal electronics directly.
* If the error persists, the sensor may need replacement—contact **HP Support at 1-866-203-7571** for professional repair.



### **2. Examine the Pickup Roller Assembly**

If the pickup roller is worn out, it won’t grab paper effectively.

**Solution:**

* Open the rear access panel.
* Inspect the roller for signs of wear or smoothness.
* Replace it if necessary. HP offers replacement kits for most printer models.



### **3. Check Printer Firmware Log**

In rare cases, firmware corruption can repeatedly trigger E4 codes.

* Perform a **firmware recovery** using HP’s firmware tool.
* Reinstall printer drivers from HP Smart or HP Support Assistant.



### **4. Contact HP Technical Support**

If none of the above works, it’s time to get expert help.
Call **HP Printer Technical Support at 1-866-203-7571** to speak with certified technicians.
They can remotely diagnose your printer or arrange service if a part replacement is needed.



## **Preventing HP Printer E4 Error in the Future**

Preventive care ensures you don’t face the E4 error repeatedly. Here’s how to maintain your printer for smooth operation:



### **1. Use High-Quality Paper**

Always use HP-recommended paper types and sizes. Avoid:

* Damp or curled sheets
* Low-quality recycled paper
* Glossy paper not supported by your model



### **2. Regular Cleaning**

Dust and debris are silent culprits behind paper feed problems.

* Clean rollers and trays every few weeks.
* Keep the printer in a dust-free, dry environment.
* Avoid placing it near open windows or humid areas.



### **3. Proper Paper Loading**

When loading paper:

* Fan the stack before placing it in the tray.
* Adjust the side guides properly.
* Do not overfill the paper tray.



### **4. Keep Firmware Updated**

Regular updates fix known bugs and improve hardware compatibility.
Enable **automatic firmware updates** if your printer supports it.



### **5. Avoid Overusing the Printer**

Continuous high-volume printing can overheat internal components, leading to feeding errors.
Give your printer periodic rest if you’re printing large batches.



### **6. Store Paper Properly**

Always store your printing paper in a cool, dry place.
Humidity can make paper stick together, leading to feeding issues and E4 errors.



### **7. Check for Foreign Objects**

Sometimes, small objects like clips, labels, or torn pieces of paper can block sensors.
Inspect the printer thoroughly before printing.



## **When to Seek Professional Help (1-866-203-7571)**

If you’ve tried all the solutions and the E4 error persists, it may indicate:

* A **damaged paper sensor**
* **Worn feed rollers**
* **Internal hardware fault**
* **Firmware or motherboard malfunction**

At this point, it’s best not to disassemble the printer yourself.

Instead, **contact HP Printer Support at 1-866-203-7571**.
Certified technicians can guide you through advanced diagnostics or schedule an in-person repair if needed.



## **HP Printer Models Commonly Affected by the E4 Error**

The E4 error can appear across several HP printer series, including:

* HP DeskJet 2600 / 2700 / 4100 series
* HP OfficeJet 5200 / 5600 / 8020 series
* HP ENVY 6000 / 6400 / 7800 series
* HP LaserJet Pro M15 / M28 series

Regardless of the model, the troubleshooting principles remain largely the same.



## **Alternative Fix: Reinstall the HP Printer Driver**

Sometimes driver conflicts on your computer can miscommunicate with the printer, resulting in false errors.

**Steps:**

1. Open **Control Panel > Devices and Printers**.
2. Right-click your HP printer → **Remove Device**.
3. Visit HP’s official website.
4. Download the latest printer driver and software package.
5. Reinstall the printer and run a test page.



## **Additional Tips to Keep Your HP Printer Healthy**

1. **Perform Regular Self-Tests:**
   HP printers often have a maintenance or diagnostic page feature. Use it monthly.

2. **Use Genuine HP Ink Cartridges:**
   Non-original cartridges can sometimes cause communication or detection issues.

3. **Avoid Overfilling Paper Trays:**
   Overloading paper trays leads to frequent jams.

4. **Keep Firmware Logs Updated:**
   HP Smart App notifies you of available firmware or driver updates.

5. **Schedule Monthly Cleaning:**
   Set a reminder to clean rollers and paper paths once a month.



## **Frequently Asked Questions (FAQ)**

**Q1. What does E4 mean on an HP printer?**
A: The E4 code indicates a paper jam or paper feed problem inside your HP printer.

**Q2. How do I clear an E4 error quickly?**
A: Power off your printer, remove any jammed paper, clean the rollers, and reload paper correctly.

**Q3. Can I use the HP Print and Scan Doctor to fix E4 errors?**
A: Yes. This tool automatically detects and fixes paper feed and connectivity issues.

**Q4. Why does my printer keep showing E4 even with no paper jam?**
A: The paper sensor might be dirty or malfunctioning. Clean it or contact support for assistance.

**Q5. Is E4 error related to ink cartridges?**
A: Indirectly, yes. Misaligned or improperly installed cartridges can sometimes trigger feed errors.

**Q6. How can I avoid E4 errors permanently?**
A: Regularly clean rollers, use the correct paper type, and ensure your printer firmware is updated.

**Q7. What if the error persists after cleaning and restarting?**
A: It’s time to contact HP Printer Support at **1-866-203-7571** for advanced troubleshooting.



## **Conclusion**

The **HP Printer E4 Error** is a common but fixable issue that usually results from paper jams, dust in rollers, or incorrect paper settings. By following the step-by-step solutions—checking for jams, cleaning rollers, resetting the printer, and updating firmware—you can quickly get your printer back in working order.

However, if you’ve tried all the solutions and the problem persists, **don’t hesitate to reach out for expert assistance**. Call **HP Printer Support at 1-866-203-7571** to speak directly with certified technicians who can guide you through advanced repair steps or arrange service if needed.

Your HP printer is designed to deliver consistent performance—and with the right care and maintenance, you can ensure it stays that way.


**Need Instant Help?**
📞 **Call HP Printer Support at 1-866-203-7571**
Available 24/7 to help fix E4 error and other HP printer issues.

