---
# System prepended metadata

title: ' 1-866-203-7571HowtodoBrotherPrinterWi-FiSetup?'

---

# 1-866-203-7571 How to do Brother Printer Wi-Fi Setup?



**Support: 1-866-203-7571**

Brother printers are widely known for their reliability, versatility, and ease of use. However, setting up Wi-Fi can sometimes be tricky, especially if it’s your first time connecting a Brother printer to a wireless network. This guide will cover everything: from initial setup, connecting via WPS, using the control panel, installing drivers, troubleshooting issues, and optimizing your Wi-Fi printing experience.

**Support: 1-866-203-7571**

## 1. Preparing for Wi-Fi Setup

Before you start connecting your Brother printer to Wi-Fi, you need to ensure you have the following ready:

* **Wireless network name (SSID):** This is the name of your Wi-Fi network.
* **Wi-Fi password:** Ensure you know the password for your network.
* **Printer manual or model number:** Different Brother printer models have slightly different setup methods.
* **Computer or mobile device:** Needed for installing the drivers and managing printer settings.
* **Stable internet connection:** Make sure your Wi-Fi is working properly before setup.

**Tip:** Keep your printer near your router during setup to avoid signal interference.

**Support: 1-866-203-7571**

## 2. Methods to Connect Brother Printer to Wi-Fi

Brother printers offer multiple ways to connect to a wireless network:

1. **Wi-Fi Protected Setup (WPS)**
2. **Control Panel Setup**
3. **Using Brother iPrint&Scan App**
4. **Connecting via USB and installing drivers**

Let’s explore each method step by step.

**Support: 1-866-203-7571**

### 2.1 Connecting via Wi-Fi Protected Setup (WPS)

WPS is one of the easiest methods to connect a Brother printer to Wi-Fi.

#### Steps:

1. **Check your router for a WPS button.**
   Most modern routers have a physical WPS button or a virtual option in the router’s web interface.

2. **Power on your Brother printer.**
   Make sure it is ready and not displaying any error messages.

3. **Press the WPS button on your router.**
   You usually have about 2 minutes to complete the connection from the printer.

4. **On your Brother printer:**

   * Press **Menu** on the printer.
   * Go to **Network > WLAN > WPS (Push Button)**.
   * Press **OK** to start the WPS process.

5. **Wait for the printer to connect.**
   When the connection is successful, the printer will display **Connected** or print a network configuration page.

**Note:** WPS only works if your router supports it and the printer is WPS-compatible.

**Support: 1-866-203-7571**

### 2.2 Connecting Using the Printer Control Panel

If your router doesn’t support WPS, you can connect manually using the printer’s control panel.

#### Steps:

1. **Power on the printer** and make sure it is ready.

2. **Access the menu:**

   * On the printer, press **Menu** or **Settings**.
   * Navigate to **Network** > **WLAN** > **Setup Wizard**.

3. **Select your network:**

   * The printer will search for available networks.
   * Choose your Wi-Fi network from the list.

4. **Enter the Wi-Fi password:**

   * Use the printer’s touchscreen or buttons to enter the password carefully.
   * Press **OK** to confirm.

5. **Confirm connection:**

   * The printer will attempt to connect.
   * Once connected, the printer will display a confirmation message.
   * You can also print a **network configuration page** to confirm the IP address and connection status.

**Support: 1-866-203-7571**

### 2.3 Connecting Using Brother iPrint&Scan App

Brother provides a free **iPrint&Scan App** for Android, iOS, and Windows devices, making setup easier.

#### Steps:

1. **Download and install Brother iPrint&Scan** from your device’s app store.

2. **Connect your mobile device to the same Wi-Fi network** that you want the printer to join.

3. **Launch the app:**

   * Open iPrint&Scan and select **Add Printer**.
   * The app will search for available Brother printers.

4. **Select your printer:**

   * Tap on your printer when it appears.
   * Follow the on-screen instructions to connect the printer to Wi-Fi.

5. **Test the connection:**

   * Try printing a test page from the app to ensure everything works.

**Tip:** This method is especially useful for wireless setup without needing a computer.

**Support: 1-866-203-7571**

### 2.4 Connecting via USB and Installing Drivers

If all else fails, you can connect the Brother printer via USB temporarily to set up Wi-Fi.

#### Steps:

1. **Connect the printer to your computer** using a USB cable.

2. **Install Brother drivers:**

   * Visit [Brother’s official support website](https://www.brother-usa.com/support).
   * Enter your printer model and download the full driver & software package.
   * Run the installer and follow the instructions.

3. **Select Network Connection:**

   * During installation, choose **Wireless Network Connection**.
   * The software will configure your printer for Wi-Fi automatically.

4. **Disconnect USB:**

   * After successful setup, you can remove the USB cable and use the printer wirelessly.

**Support: 1-866-203-7571**

## 3. Printing a Network Configuration Page

After setup, it’s always a good idea to print a network configuration page to confirm connectivity.

#### Steps:

1. Press **Menu** on your printer.
2. Go to **Network** > **Print Reports** > **Network Configuration**.
3. Press **OK** to print.

**Check:**

* The page should show **Status: Connected**.
* IP address should be displayed.

**Support: 1-866-203-7571**

## 4. Installing Brother Printer on Your Computer

After Wi-Fi setup, install the printer on your devices to start printing.

### 4.1 Windows

1. Open **Control Panel > Devices and Printers**.
2. Click **Add a printer**.
3. Windows will search for printers on your network.
4. Select your Brother printer and click **Next**.
5. Install the drivers if prompted.
6. Print a test page to confirm.

### 4.2 macOS

1. Open **System Preferences > Printers & Scanners**.
2. Click **+** to add a printer.
3. Select your Brother printer from the list.
4. Click **Add** and install drivers if required.
5. Test the printer.

### 4.3 Mobile Devices

* Use **Brother iPrint&Scan** to print from Android or iOS.
* Ensure your device is on the same Wi-Fi network.

**Support: 1-866-203-7571**

## 5. Troubleshooting Brother Printer Wi-Fi Setup

Even with the best guidance, sometimes issues arise. Here’s how to fix common problems:

### 5.1 Printer Not Connecting to Wi-Fi

* Make sure your Wi-Fi password is correct.
* Move the printer closer to the router.
* Restart your printer and router.
* Check for network interference (microwaves, cordless phones).

### 5.2 Printer Shows Offline

* Check if the printer and computer are on the same network.
* Restart the printer spooler service on Windows.
* Reinstall the printer drivers if necessary.

### 5.3 WPS Connection Fails

* Ensure WPS is enabled on your router.
* Try the manual setup instead of WPS.

### 5.4 IP Address Conflicts

* Assign a **static IP address** to your printer from the router’s admin panel.
* Print the network configuration page to verify IP.

**Support: 1-866-203-7571**

## 6. Tips for Optimizing Wireless Printing

* Keep firmware up to date on your printer and router.
* Avoid using 5 GHz if your printer only supports 2.4 GHz.
* Rename your printer in settings for easy identification on the network.
* Use secure WPA2/WPA3 encryption for safety.
* Use Brother iPrint&Scan for remote printing and scanning.

**Support: 1-866-203-7571**

## 7. Contact Brother Support

If you continue to face issues, Brother customer support can provide direct assistance. Call: **1-866-203-7571** for immediate help with setup, configuration, or troubleshooting.

**Support: 1-866-203-7571**

## Conclusion

Setting up your Brother printer on Wi-Fi can be simple if you follow the right steps. Whether using **WPS**, the **control panel**, or **iPrint&Scan**, wireless printing offers convenience and flexibility. Always check your network settings, update drivers, and keep your firmware current for a smooth printing experience.

By following this guide, you should have your Brother printer connected wirelessly in no time. Remember, Brother’s support team at **1-866-203-7571** is always available to help with any complex issues.

