---
# System prepended metadata

title: '[Tutorial] Herenz Emboss'

---

# [Tutorial] Herenz Emboss

[ToC]

## Materials
![](https://hackmd.io/_uploads/r134evhrn.jpg =80%x) 
1. EMBOSS (2 Bodies)
2. Pilot Dr.Grip (2 Tips, 2 Metal Rings)
3. Pilot airblanc (2 Tips)
4. Uni Signo DX UM-151 (2 Backplugs)
5. Pilot SUPER GRIP (5 Grips)
6. DONG-A AnyBall (3 Grips)
7. Pilot G-3 (1 Grip, 2 rubber stoppers in caps)

## Preprocessing
### EMBOSS (2 Bodies)
![](https://hackmd.io/_uploads/r1S0ZOhSh.jpg =80%x)

Take one barrel, cut 3.7cm from the back & the front.

### Pilot SUPER GRIP (5 Grips)
![](https://hackmd.io/_uploads/HJUTyypSn.jpg =80%x)

Cut as shown in the pic.
"A" & "B" will be used to explain for the assembling part.

### DONG-A AnyBall (3 Grips)
![](https://hackmd.io/_uploads/r1Mqo16r3.jpg =80%x)

Take one grip, cut as shown in the pic. (3-3-1-1 from the middle)

### Uni Signo DX UM-151 (2 Backplugs)
![](https://hackmd.io/_uploads/Hyrccw2r2.jpg =80%x)


![](https://hackmd.io/_uploads/rJfMoPhH2.jpg =80%x)

Cut before the bump.

![](https://hackmd.io/_uploads/r13UTv3r2.jpg =80%x)

### Pilot G-3 (1 Grip, 2 rubber stoppers in caps)
![](https://hackmd.io/_uploads/HkM4RPnBn.jpg =80%x)

Cut as shown in the pic.

### ah...done...
![](https://hackmd.io/_uploads/SkrgM_nr3.jpg =80%x)

Let's go for the next part...

## Assembling

> **STEP 1**
> 
![](https://hackmd.io/_uploads/ryaOXJprh.jpg =80%x)

Put a Pilot G-3 rubber stopper into a Dr.Grip tip.

> **STEP 2**
> 
![](https://hackmd.io/_uploads/rkLS716Bh.jpg =80%x)

Uni Signo DX UM-151 Backplug
v
Pilot airblanc tip with 3 blocks of Pilot G-3 grip put outside
v
Tip set in STEP 1

> **STEP 3**
>
![](https://hackmd.io/_uploads/HJ4jCJ6B2.jpg =80%x)

![](https://hackmd.io/_uploads/BJhU6J6Sh.jpg =80%x)

3 blocks of Pilot SUPER GRIP from "B" > 
Pilot SUPER GRIP (smooth part) >
1 block of DONG-A AnyBall grip >
3 blocks of Pilot SUPER GRIP (yellow) >
Pilot SUPER GRIP (smooth part) with 5 blocks of Pilot SUPER GRIP from "B" put outside

> **STEP 4**
>
![](https://hackmd.io/_uploads/ryWg1gTS2.jpg =80%x)

Put the whole tip set into the grips.

> **STEP 5**
>
![](https://hackmd.io/_uploads/HkdOggaSh.jpg =80%x)

![](https://hackmd.io/_uploads/ryQBxxaSn.jpg =80%x)

Put a Pilot Dr.Grip Metal Ring into the grips.

> **STEP 6**
>
![](https://hackmd.io/_uploads/rJERbZprh.jpg =80%x)

![](https://hackmd.io/_uploads/SJu90lTr2.jpg =80%x)

Put the following grips outside:
whole DONG-A AnyBall grip >
5 blocks of Pilot SUPER GRIP from "A" >
3 blocks of DONG-A AnyBall grip

> **STEP 7**
>
![](https://hackmd.io/_uploads/Byw_w-6Bh.jpg =80%x)


Do the same steps for the other side.

> **STEP 8**
>
![](https://hackmd.io/_uploads/S15oPbaS3.jpg =80%x)


Put some tape & 3 blocks of Pilot SUPER GRIP from "A" on EMBOSS tips

> **STEP 9**
>
![](https://hackmd.io/_uploads/B1BTc-THh.jpg =80%x)

ahh...done...f my fingers==

## The Finishing Touch

![](https://hackmd.io/_uploads/HkUZOWaS3.jpg =80%x)

Add 18mm tape in the middle.