---
# System prepended metadata

title: 111-2 包裝結構設計 230515
tags: [NTUA, Co-pen, 圖文共筆]

---

# 111-2 包裝結構設計 230515
###### tags: `NTUA` `圖文共筆` `Co-pen`
*可登入協助內容更正及更新
*歡迎共同建置[台藝圖文共筆精華區（GCA Co-pen）](/dnE8gi57QgOn_vmqpUmnHg)
# 參考圖
![](https://hackmd.io/_uploads/BkhcSTNHh.png)
# 設定檔案
開啟artios CAD→建立設計→參數設定選取Corrugated-Metric-Single design parameters
*單位記得設定成mm
![](https://hackmd.io/_uploads/r1ER7aNB3.png)
# 參考線
參考線工具-直線
![](https://hackmd.io/_uploads/SyQ07p4Bh.png)
(點選)在線上選取起始點→(點選/輸入)設定角度→(點選/輸入)設定偏移量
![](https://hackmd.io/_uploads/S1Q0XTErh.png)
參考圓工具
![](https://hackmd.io/_uploads/S1XCXa4Sn.png)
![](https://hackmd.io/_uploads/Hy7RQT4Hh.png)
# 繪製線段
輔助圓相切工具
![](https://hackmd.io/_uploads/Hk70mTNSh.png)
*ctrl+Q可點選任意起始點
(點選)起始點→(點選)內切/外接圓→(點選)終點
![](https://hackmd.io/_uploads/Hk7A7aEB3.png)
![](https://hackmd.io/_uploads/H1NRX64rh.png)
![](https://hackmd.io/_uploads/BymCXaEr3.png)
![](https://hackmd.io/_uploads/rkVA7pEr2.png)
# 標記尺寸
半徑測量工具
![](https://hackmd.io/_uploads/HkQRQ6Vrn.png)
(點選)圓弧即可標記半徑
![](https://hackmd.io/_uploads/H1nYKFIH2.png)




