---
# System prepended metadata

title: '**HCIA-Security V4.0 Mock Exam & Answers**'

---

# **HCIA-Security V4.0 Mock Exam & Answers**

1.	With a large number of network users, large enterprises usually use a hierarchical structure to support network expansion and growing number of users.
•	True
•	False

2.	During the ARP process, ARP reply packets are sent in broadcast mode. All hosts on the same Layer 2 network can receive these packets and learn the mapping between IP and MAC addresses.
•	True
•	False
3.	The persistent connection function of the firewall allows you to set a long aging time for specific TCP and UDP data flows, ensuring that the session information does not age out for a long time.
•	True
•	False
4.	After receiving a packet, the LNS checks whether the TCP destination port number is 1701. If so, the LNS sends the packet to the L2TP processing module for further processing. If not, the LNS processes the packet as a normal IP packet.
•	True
•	False

5.	NAT in Easy IP mode translates only private IP addresses. It cannot translate port numbers.
•	False
•	True

6.	Proactive preemption is a process in which the active firewall takes over services when it recovers from a fault. Proactive preemption is enabled by default.
•	True
•	False
7.	If the IKE negotiation mode of the IPsec VPN is the main mode, the ID type must be an IP address.
•	True
•	False
8.	IKEv1 negotiation phase 1 aims to establish an IKE SA, and supports two negotiation modes: main mode and aggressive mode.
•	True
•	False

9.	On the CLI, users can view the running status and statistics in the user view, but not in the system view.
•	False
•	True
10.	SSL is a security protocol that provides secure connections for TCP-based application layer protocols like HTTP.
•	True
•	False
11.	The web redirection password authentication function of a USG firewall enables a user to access services without being proactively authenticated, and the device pushes the authentication page to the user.
•	True
•	False


12.	FTP is used for long-distance file transfer between two hosts and can ensure the reliability and confidentiality of data transmission.
•	True
•	False
13.	When a USG firewall serves as an out-of-path detection device, you need to configure the detection interface as a Layer 3 interface.
•	True
•	False
14.	A USG firewall is usually deployed between the external network and the network to be protected. It generates threat logs when detecting viruses, intrusions, botnets, Trojan horses, or worms.
•	True
•	False
15.	When the stateful inspection function is disabled, the firewall creates a session for subsequent packets.
•	False
•	True
16.	The intrusion prevention function of the firewall detects and terminates intrusions (such as buffer overflow attacks, Trojan horses, and worms) in real time to protect enterprises' information systems and network architectures.
•	True
•	False
17.	The heartbeat link is a channel through which two firewalls exchange messages to learn about each other's status and back up configuration commands and entries. The MGMT interface can be used as the heartbeat interface.
•	True
•	False

18.	Huawei Redundancy Protocol (HRP) is used to synchronize information such as key configurations, connection status, routing tables, and interface addresses between the active and standby firewalls.
•	True
•	False
19.	A network device searches the routing table according to the destination IP address field in the IP packet header, and then forwards the data based on the search result.
•	True
•	False
20.	In an IP sweep attack, an attacker sends ICMP packets to probe the IP address of the target network and obtain the topology of the target network and active devices.
•	True
•	False

21.	In tunnel mode of IPsec, to authenticate a new IP header, which of the following IPsec protocols needs to be used?
A.MD5
B. SHA1
C. AH
D. ESP

22.	Which of the following values is the default security level of the Trust zone on a Huawei USG firewall?
A. 5
B. 50
C.85
D. 100






23.	Which of the following statements is incorrect about TTL in IP packets?
A. TTL is the maximum number of hops that an IP packet can be forwarded on a computer network.
B. The main function of TTL is to prevent IP packets from being circulated over a network infinitely, thereby saving network resources.
C. The TTL value decrements by 1 every time a packet is forwarded to a Layer 3 node.
D.The TTL value of a packet ranges from 0 to 4095.

24.	When an administrator wants to configure a USG series firewall through the console port, which of the following configurations should be made in the putty?
A. 19200 bps, 8 data bits, 1 stop bit, no parity check, and no flow control
B. 9600 bps, 8 data bits, 1 stop bit, no parity check, and no flow control

C. 4800 bps, 8 data bits, 1 stop bit, odd parity check, and no flow control
D. 9600 bps, 8 data bits, 1 stop bit, even parity check, and hardware-based flow control
25.	Which of the following messages can provide error information and IP packet processing information for?
A. TCP
B. IGMP
C.UDP
D. ICMP

26.	Which of the following statements is correct about a firewall's interzone security policies?
A. Interzone security policies are matched sequentially from the top down.
B. Interzone security policies are matched sequentially from the one with the smallest ID.
C. Interzone security policies are matched sequentially from the one with the largest ID.
D. Interzone security policies are automatically sorted by ID. If the position of a policy changes, the ID of the policy changes accordingly.
27.	Which of the following statements is correct about the function of lateral movement in network penetration?
A. An attacker obtains the IP address, domain name, active port, and communication information of the target network through scanning and network monitoring to lay a foundation for subsequent attacks.

B. After accessing the target system, the attacker cannot perform lateral movement due to a lack of privileges. Therefore, the attacker may try to elevate privileges.

C. Lateral movement is to penetrate other devices that may have vulnerabilities on the network through controlled hosts or servers.

D. Communicate with the customer to understand the target of the penetration test, such as the system, server, and IP address.
28.	Which of the following attacks is not a network-layer attack?
A. Smurf attack

B. IP spoofing attack

C. Port scanning

D.IP sweep





29.	If packet loss occurs when hosts A and B communicate with each other through TCP, how does TCP ensure reliability?
A. Host B sends ICMP packets to host A to notify data loss.
B. Host B uses the ACK field to instruct host A to retransmit packets.
C.The Option field in TCP packets is used to ensure reliability of host A and host B.
D.The sliding window mechanism is used between the two hosts to ensure reliability.
30、
Network penetration simulates hackers' intrusion behaviors and thought patterns to perform non-destructive security tests on customer systems. Which of the following is the correct sequence of the network penetration process?
A. Collect information -> Confirm the target -> Implement penetration -> Perform lateral movement -> Elevate privileges -> Clear traces

B. Confirm the target -> Collect information -> Implement penetration -> Perform lateral movement -> Elevate privileges -> Clear traces

C. Confirm the target -> Collect information -> Perform lateral movement -> Implement penetration -> Elevate privileges -> Clear traces

D. Confirm the target -> Collect information -> Implement penetration -> Perform lateral movement -> Clear traces -> Elevate privileges
31、
Which of the following values is the default port number of the SSH protocol?
A. 20
B.21
C.22
D.23
32、
On a USG firewall, which of the following commands is used to view current session entries?
A. display firewall statistic
B.display firewall session table
C.display firewall routing table
D.display firewall fib session
33、
Which one of the following parts is not included in a digital certificate?
A. Name of the certificate holder
B. Certificate validity period
C. Certificate private key
D. Certificate public key
34、
When firewalls are deployed in hot standby mode, which of the following protocols is used to switch the status of the entire VRRP group?
A. VRRP
B. VGMP
C. IGMP
D. ICMP




35、
Which of the following statements is correct about firewall security zones?
A. 
The default security zones cannot be deleted from a firewall.

B. 
An interface on a firewall can belong to multiple security zones.

C. 
Different security zones can have the same security level.

D. Different interfaces on a firewall can belong to the same security zone.
36、
Which of the following is a private IP address?
A. 192.200.1.1

B. 172.32.1.1

C. 192.1.1.1

D.172.20.2.1
37、
Huawei Redundancy Protocol (HRP) is used to synchronize data such as the key configurations and connection status of the active firewall to the standby firewall. Which of the following data is beyond the synchronization scope?
A. Routing table

B. Security policies

C. NAT policies

D.Blacklist
38、
Which of the following statements is incorrect about the RADIUS protocol?
A. It encrypts only the password field in an authentication packet.

B. By default, UDP is used, and the authentication and authorization port numbers are 1812 and 1813 or 1645 and 1646, respectively.

C. Authentication and authorization are processed together.

D.It supports authorization of configuration commands.
39、
Which of the following steps is optional for configuring intrusion prevention?
A.Creating an IPS profile
B. Configuring a signature filter
C. Configuring signature exceptions
D.Referencing an IPS profile in a security policy


40、
Which of the following statements is correct about the characteristics of a DDoS attack?
A. An attacker intrudes into the target system through a backdoor program.

B. If the target system has no vulnerability, the remote attack cannot succeed.

C. The purpose of such an attack is to steal confidential information from the target system.

D. The attack behavior can prevent the target system from processing the requests of authorized users.

41、
Which of the following security functions can be provided by the AH protocol in IPsec?
A. Data origin authentication

B. Data integrity verification

C. Data confidentiality

D.Anti-replay
42、
Which of the following methods can be used to implement the SSL VPN web proxy?
A. Web link

B. Web transparent transmission

C. Web rewriting

D. Web forwarding
43、
If the administrator has configured the Telnet service on the firewall but a user still cannot access the firewall remotely, which of the following are possible causes of the access failure?
A. The user enters an incorrect password.

B. The number of online Telnet users reaches the upper limit.

C. The network between the user and the firewall is unreachable.

D. The Telnet user level is incorrectly configured.
44、
Which of the following parameterss comprise an IPsec SA?
A. SPI

B. Source IP address

C. Security protocol number

D.Destination IP address



45、
Which of the following protocol technologies are used when firewalls are deployed in hot standby mode?
A. VGMP

B. IGMP

C. VRRP

D. HRP
46、
Which of the following VPNs are Layer 3 VPNs?
A. L2TP VPN

B. GRE VPN

C. SSL VPN

D. IPsec VPN
47、
A session-based stateful inspection firewall processes the first packet and subsequent packets differently. Which of the following statements are correct?
A. When receiving a packet, the firewall searches for a matching entry in the session table. If a matching entry is found, the firewall processes the packet as a subsequent packet.

B. When receiving a packet, the firewall searches for a matching entry in the session table. If no match is found, the firewall processes the packet as the first packet.

C. When stateful inspection is enabled, subsequent packets also need to be checked based on security policies.

D. When stateful inspection is enabled and the firewall processes TCP packets, a session can be established only for SYN packets.
48、
Which of the following statements are correct about the decapsulation of data packets in the TCP/IP protocol stack?
A. The physical network layer receives frames, calculates the CRC of the frames, and then sends the frames to the data link layer.

B. After the network layer receives and parses data packets, network layer information is removed, and the upper-layer protocol is obtained based on the parsing result.

C. The data link layer checks whether the CRC of the frames is correct, deletes the frame header and CRC, and then sends the frames to the network layer.

D. After the transport layer (TCP) receives and parses data packets, transport layer information is removed, and the upper-layer protocol is obtained based on the parsing result.






49、
Which of the following can be used to implement AAA on Huawei devices?
A. HWTACACS
B. RADIUS
C. LDAP
D. AD
50、
Which of the following algorithms are symmetric encryption algorithms?
A. DES
B. 3DES
C. MD5
D. SHA1
51、
Which of the following VPNs are suitable for employees on business trips to access the enterprise intranet from the public network?
A. L2TP VPN
B. GRE VPN
D. SSL VPN
C. L2TP over IPsec
52、
Users are network access subjects and basic units for network behavior control and network permission assignment by firewalls. Which of the following are involved in the user organizational structure?
A. Authentication domain
B. Security group
C. User group/User
D. Isolation group
53、
Which of the following principles must be adhered to when you configure the security levels of the firewall security zones?
A. Two security zones in the same system cannot be configured with the same security level.
B.The security level cannot be changed once it is configured.
C. The default security level of a new security zone is 100.
D. Security levels can be set only for user-defined security zones.

54、
Which of the following are components of a PKI system?
A. End entity
B. Certificate authority
C. Certificate registration authority
D. Certificate/CRL database
55、
Which of the following backup modes are supported by the HRP mechanism?
A. Real-time backup
B. Scheduled backup
C. Quick backup
D. Batch backup



56、
Which of the following TCP ports are used by the FTP service by default?
A. 20

B.23

C. 22

D.21
57、
Which of the following are common network topologies?
A. Tree topology

B. Bus topology

C. Star topology

D. Ring topology
58、
Which of the following authentication modes are available for Internet access users?
A. Built-in Portal authentication
B. SSO
C. User authentication exemption
D. User-defined Portal authentication
59、
The digital certificate technology addresses the problem from the digital signature technology that the owner of a public key cannot be determined. Which of the following are types of digital certificates?
A. CA certificate
B. Self-signed certificate
C. Local certificate
D. Local device certificate
60、
Which of the following ports are used as the default authentication and accounting ports of the RADIUS protocol?
A. 1811
B. 1812
C. 1814
D. 1813
