# 各次系統的電力相關資料

## ADCS

### 工作電壓
| Component | Operation Voltage | Maximum current | In-rush current |
|:------------------:|:-----------------:|:-----------------:|:---------------:|
| CubeComputer | 3.3V | 100mA | 120mA - 1000µs |
| CubeMag Deployable | 3.3V | 70mA | 230mA - 100µs |
| CubeMag Compact | 3.3V | 70mA | 230mA - 100µs |
| CubeSense Sun | 3.3V | 78mA | 260mA - 1000µs |
| CubeSense Earth | 3.3V | 85mA | 221mA - 50µs |
| CubeStar | 3.3V | 83mA | 180mA - 1800µs |
| CubeWheel | 3.3V | 79mA | 270mA - 0.5µs |
| CubeTorquer | 5.0V | 74mA peak per rod | N/A |
| Reaction Wheel | V battery | 672mA (TBD) | N/A |
- CubeTorquer
- 我們衛星使用CR0003
- Reaction Wheel
- 我們衛星使用CW0057

### PC104
- 實際角位是可以客製化的，之後再跟PM討論

### CubeConnect
- CubeConnect is part of the CubeADCS core and serves as the interface PCB to connect the various sensors and actuators

- 目前看來電力從PC104進入後就由PCB板的接孔來分配對應的工作電壓值了

#### Magnetorquer Header
- The CubeConnect supports the connection of three CubeTorquers
- 磁力矩的工作電壓為5V

#### Wheel Headers
- FourCubeWheelscan be connected to CubeConnectsimultaneously.
- Three headersare locatedonthe bottom of CubeConnect

#### Sensor Headers
- Sensor的工作電壓為3.3V

## Payload
### Camera
* 我們用的相機是:Python2000
* 不知道上下兩個的差別(問佳廷了)