---
# System prepended metadata

title: '[Win 10 Remove Pluse Secure] The Problem with Network connect'
tags: [It's a trap!, Network, Solve, 2022/06/22]

---

# [Win 10 Remove Pluse Secure] The Problem with Network connect    
###### tags: `It's a trap!` `Solve` `Network` `2022/06/22`   

# [Win 10 移除 Pluse Secure 吧] 伴隨而來的無法連線!  

---

Sometimes, you may just want to use the vpn to connect to school resources!  

But, it's got too much problems~   

> Can't connected, Auto stop...etc.   

> You may following the steps below~   

有時，您可能只想使用 vpn 連接到學校資源！   但是，問題太多了~  
> DHCP 不是應該會自動抓設定嗎?    
> 無法連接，VPN 自動停止服務...等。   
> 移除後有某些狀況下可能無法連線, 網路設定檔跑掉了?!   
> 但你可以按照以下步驟操作~   
> 來想辦法回到網路世界中~~~   

---

## 1. If you install the Pluse Secure, but just want to remove!   
如果您安裝了 Pulse Secure，只想移除它！

==**Right click, 右鍵**== → Device Manager, 裝置管理員   

![](https://i.imgur.com/LSXjUnL.png)   

```
Update the Network adapters, especially the Realtek PCIe xxx
更新網絡介面卡，尤其是 Realtek PCIe xxx
```

If can't resolve, try step 2.   
如果不行, 試試看第二步~   

----

## 2. Rest the TCP/IP protocol   
重設 TCP/IP 協議   

Input, 按下: `Wins + R`   

![](https://i.imgur.com/ijbx54W.png)   

Key in, `CMD`, if you can, perform it with "Administor permission"   
輸入 `CMD` 而且可以的話最好是有管理員權限的模式~   

And Key in the Cli, by following~   
接著輸入以下指令   
  
  ```
netsh int ip reset
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global rss=enabled
  ```

Then, reboot your PC!   
重開機~   

You may solve yet!   
你可能解決它了!?   

But, sometimes you can't, because "Pluse Secure" set too much in network configuration file   
但有時候你並不能解決, 因為 "Pluse Secure" 這個軟體在網路設定檔案上設定的太多~   

So, try step 3.  
好吧, 試試看第三步~   

----

# 3. Renew the IP adress from DHCP   

By use the cli with ==**CMD**==: 
一樣用 `CMD` 輸入指令   

Same, push the `Wins + R`   and also `Ctrl + Shift + Enter` to perform the administrator permission mode   
但在你輸入指令的這個 ↓ 畫面時, 同時按下 `Ctrl + Shift + Enter` 來轉成系統管理員模式   

![](https://i.imgur.com/TrgrTuk.png)    


![](https://i.imgur.com/eUmjOCD.png)   

And copy the cli ↓   
接著複製以下指令  ↓   
```
ipconfig /release
ipconfig /renew
```

Reboot and reconnect, try it resolve or not   
重開機和連線, 看看問題解決否~   

---

# 4. Check the IPv6 protocol   

如果你真不幸來到這一步, 好吧!  

因為這是個大坑, 你可能需要去桌面的右下角找找看   

This is the big trap, because you need go to bottom right from you desktop~   
```
Network and Internet Settings 
對~ 就是那個看起來像螢幕的東西, 
也就是網路和網際網路設定
```
![](https://i.imgur.com/AtTrxR4.png)   

And   

```
Change interface card options
點進去後, 接著更改 "變更介面卡選項"
```

You may saw the UI `Internet connection
`, and right click the content   

看到你的網路連線嗎?  
找到乙太網路, 右鍵 "內容"   

![](https://i.imgur.com/JhoiwQV.png)   

==**Disable the IPv6**==   

如下圖, 停用 IPv6 這個選項   

![](https://i.imgur.com/kqUZ7fU.png)   

Finally, Reboot, Reconnect, and congratulations!  
終於, 請重開機, 重新連線, 並恭喜你~~~   

Welcome back to civilized society!!!   

歡迎回來文明的世界~~~   

----

## 參考文章   

[\[最全\]修復Windows 10 WiFi連不上的解決辦法 (mytechgirl.com)](https://www.mytechgirl.com/tw/windows/fix-windows-10-wifi-can-not-connect-mtg6688.html#_1)   

