# Explosion Proof Exhaust Fans Installation

Explosion Proof Exhaust Fan is actually an interest resistant ventilation system, designed to do the task of providing ventilation and controlling the overall temperature inside a room or factory unit. These units are installed on the walls and can be found in the marketplace in a variety of types of explosion proof exhaust fan ventilation systems.

There are factories and manufacturing plants is which highly inflammable gases alongside vapors as well as finely crushed dust particles are present. These substances are generally created consequently of the manufacturing process and some of them could even contain highly ignitable fibers as well.

Due to the presence of these substances the overall atmosphere at the factory unit becomes hazardous and is highly vulnerable to accidents or types of explosions. In such hazardous locations a top quality air exhaust and ventilation system is necessary which helps to keep the overall inside atmosphere safe. This could easily be achieved by installing an explosion proof exhaust fan.

Explosion Proof Exhaust Fan Installation Guide
Industry is full of wide selection of these fans but all of them require almost the same installation procedures and guidelines. However certainly one of the most important considerations is which form of **[explosion proof exhaust fan](https://exhaustfanchina.com/)** is going to be ideal for you'll depend upon the sort of hazardous or inflammable gases are used or produced as by-products in your manufacturing unit.

Certainly one of the most important points to be taken into account before installing this method is you have to install a duct system for providing a safe passage for the gases and hazardous fumes to escape from the factory unit. It is going to be best if you first choose installing a duct system before thinking about mounting the ventilation system.

Step 1 - First and foremost part of installing is fixing the exact spot that needs to be high enough for allowing the gases to escape with ease. Also consider whether a duct system is going to be installed or not just like the help of this method it is simple to provide safe passage for gases and fumes to escape. It is preferred to install the duct system before installing the ventilation system. The machine ought to be installed in this way that the direction of the ventilated air is away from the structure. Depending upon the overall size of the fan you can either set it up on the wall or the ceiling.

Step 2 - The second step is to make a beginning according to the dimensions of the fan. For getting the work done in a precise manner, mark the location along with the holes to be drilled and on the foundation of it offer an opening and install accordingly.

Step 3 - Make sure that the wall is capable to bare the weight of the system. If it cannot bare it, consider installing wooden planks as they can easily be cut and even provide support to the system.

Step 4 - When you have finished with opening the hole, install the machine by screwing it and do all the required inspections before the final wiring must be done.

Step 5 - When you have installed the machine, start focusing on installing the wiring by giving a top quality switch and power connection. Pre run the machine for performing the required tests and check the effectiveness of the installed system.