Khadas VIM3 initial config Brief description This GUIDE will show: How to flash a selected OS to the eMMc-storage of the VIM3. Show the initial boot Describe how to RE-flash the eMMc-storage for when another OS needs to be installed on the device. Costum OS-images Change username/password allong with ethernet settings using script How to install DOOM for fun

This document describes the requirements and steps to create a Zabbix proxy host. 1 Project Structure Figure 1: (Demo) project structure In the above image (Figure 1) the project structure is displayed, this is to get a full view and understanding of what will be built in the next chapters. The Zabbix master will communicate with the Ubuntu host using port 10050 and 10051 on the UDP protocol. The proxy host itself will be running three services; Zabbix proxy

SBC-selection for Zabbix proxy This short document describes and compares two selected Single Board Computers (SBC's) wich are capable of running Zabbix proxy. There are only two SBC's documented as these are the top picks of previous comparisons not mentioned in this document. Table of Contents [TOC] 1 Purpose In order to run a Zabbix proxy, there needs to be a compute module where it can be run on. A Raspberry Pi could be a perfect example of this. However, the downsides of a Raspbarry Pi are the following: