# Regular Meeting (2020.8.24)

1. Test circuit for switch
2. Test ibert with optical moduld on VCU108(10 days)
3. Idea to reduce the reset rate of transceiver

## 1. Test circuit for switch

I think that problem is caused by probe, as following experiment

### 1.0 Environment for test

### 1.0.1 Probes/Wires

* Probes-1 (`p1`)
* dual BNC-Crocodile_clip

* Probes-2 (`p2`)
* single BNC-BNC

* Oscillator(*osc*)
* Sampling rate: 40 GHz
* Bandwidth: 3.5 GHz

* Function generator(*fn*)
* Sample rate: 500 MHz
* Bandwidth: 40 MHz
* Voltage for this test
* v_pp: 1v
* v_offset: 1.5v
* Wave:
* sinusoid
* square

### 1.1 Test 1
* Connect `p1` *osc* and *fn*
* Frequency(*freq*): 1M Hz
* *Osc* impedance: 1M ohm
* **We 1st test switch is this condition**


### 1.2 Test 2
* Connect `p2` between *osc* and *fn*
* Frequency(*freq*): 1M Hz
* *Osc* impedance: 1M ohm


## 2. Test ibert with optical moduld on VCU108(10 days)

* Starting test from 8/14 afternoon
* Shutting test result on 8/24 morning


## 3. Idea to reduce the reset rate of transceiver

[link](https://hackmd.io/@BelleII-CDC-Trig-NTU-DeWei/rkuHAw_fw)

###### tags: `Regular Meeting` `DeWei`