---
# System prepended metadata

title: Renders v2

---

# Renders v2


The plans have been updated, to make it a little bit smaller. We have removed the hallway/connection between the living room area and the working area (what we call "atelier"). Instead of a hallway, there will be a window at every side. We are also keeping the garage the way it is now, in the old plans we were making it a little bit bigger. Our bed room is going to be a bit smaller, and the seating area (that extends from the building) is going to be a bit smaller.

We want 3 renders in total:
- the view from last time (but zoomed in a bit more) 
- the view from last time (but zoomed in a bit more)
- the view from the street (so we can show almost nothing changes)

Let's start with the renders from last time. I asked my architect to draw the changes on the renders, which he did but it's a bunch of scribbles unfortunately. I hope you will understand what he means... I will help translate:

![](https://hackmd.io/_uploads/H1IL0--zp.jpg)

- we made the bedroom smaller, so the building is 20cm less long
- we made the seating area smaller, so the extension is 30 cm less deep
- the window in the seating area, goes from floor to ceiling, now it's not going all the way to the ground
- the hallway with the window to go from the living room to the atelier is now gone, so we will leave it as is and it's just a brick wall like it is now in the pictures
- both chimneys stay (at one point he wanted to remove one of them)
- the chimneys are going to be bricks, the concrete top will be removed

![](https://hackmd.io/_uploads/r1wLC-ZG6.jpg)
- so here again he shows the bedroom is 20cm smaller
- again he shows the chimney stays
- the swimming pool will look a bit different, he wants the concrete of the swimming pool to match the concrete of the terrace
- he again shows the seating area is 30cm less deep
- we want to accentuate the border more, this is what I mean with "zoom in", I know I told you to zoom out but we actually want it more close up, because it gives the impression the garden is bigger than it really is otherwise
- the pool will be a little different by the way, one side will be lower and the water will flow over the end, the idea is that if leaves fall on the water, they will float to one end and we can collect them with a rake

## Render #3 (the new render)

![](https://hackmd.io/_uploads/H1WiZfZGa.png)
![](https://hackmd.io/_uploads/S1C3WzWf6.jpg)
![](https://hackmd.io/_uploads/ByqgmMWzT.jpg)


- the picture shows more or less the view we want
- we want the view from the street
- we want to show we are keeping that exactly as is
- we need to remove concrete in some places, the drive way is one of those places, we will remove the drive way in favour of two concrete lines, with grass in between
- if you look at the arrow, **the start of the arrow is the viewpoint for the 3rd render**


It is **very** hard to show you an example of the concrete we want to use... We will use the same concrete everywhere. So both the pool, the terrace and the drive way will be "uitgewassen kiftbeton". I believe in english this translates to "exposed aggregate concrete".

It will look like this, but more white:

 ![](https://hackmd.io/_uploads/rkG6zfbGT.jpg)
