---
# System prepended metadata

title: How to reset TP-Link Wifi password?

---

# How to reset TP-Link Wifi password?

## How to reset TP-Link extender password

A device that is used to extend the total coverage area of your Wi-Fi connection is known as an extender. It is used in offices, homes, etc. Works like:-

It first receives the existing Wi-Fi signal, transmits it, and then transmits the enhanced Wi-Fi signal. Sometimes TP-Link wifi extender does not work, so in that case you need to know how to reset TP-Link extender password.

### Know About Extenders:-

First, connect your extender to the router to help spread Internet signals to different rooms or floors. You need to configure TP-Link wps wifi extender. Through this, he effectively increased the coverage area of his spreader network. Most wifi extenders are used to improve the wifi coverage area. For wireless networks to reach every corner of the building. There are different types of extenders, but not all extenders work in exactly the same way.

## TP-Link WiFi Extender Not Working:-

Sometimes faced many issues during work, such as troubleshooting, TP-Link wifi extender not working, etc. Next, he checked how the extenders worked. How to reset TP-Link extender password, how to set up TP-Link extender, etc.

How do the extenders work?
Let's talk a bit about how the extender works with wifi routers, there are instructions that are followed during the connection:

* Once a connection is made between the internet connected device and the router.
* Your TP-Link WPS Wi-Fi Extender then takes the existing Wi-Fi signal, amplifies it, and then transmits these signals to every corner of the building.
* At that time, the device connected to the Internet and the router should be closed to each other.
* In this way, it easily captures the signals and you arrive with your Wi-Fi connections everywhere.

If your TP-Link wifi extender is not working, please find out how to reset TP-Link extender password.

## How to set up TP-Link extender:-

First of all, they need to connect the wifi range extender to the LAN port of the TP-Link. Sometimes it's really confusing even after trying wps and browser settings. It is not working properly, you are facing some problems. Therefore, you will need to fix these issues in the TP-Link extender settings correctly by following these steps:

* Left-click Start Options->Control Panel->Change Network Adapter Settings. Thereafter, set the static IP address.
* Open any page of the web portal, type the IP address of the TP-Link extender, and then press the Enter button. Enter your username and password to login and
* Then click the OK button.

The above IP settings are ready to log into TP-Link web interface for configuration. In this way, you need to do the configuration of TP-Link wps wifi extender.

### Factory default for TP-Link extender: -

Before resetting the password of your TP-Link wifi range extender, please check all the login details for this device, such as the TP-Link extender settings, and follow all these instructions:

* First, find the reset button on the back of your device.
* Then click on the reset button using the paper push pin or any of the other sharp objects.
* And just tap or hold that reset button for a few seconds and then your device is set to default settings.
* Now, your device has rebooted and changed the wifi password of TP-Link extender automatically.

### Steps needed to reset TP-Link extender password:-

Check how to reset TP-Link extender settings. If your TP-Link Wifi extender is not working, please follow some steps to reset your TP-Link extender password.

### TP-Link WiFi extender not working

There, the old login username and password are both "admin". If you have already changed the password of the TP-Link extender, then there is no other way to find it. After that, reset to factory defaults and set it up as a new one.

* Now, check that the extender is turned on before it completely resets.
* The default login username and password for TP-Link extender configuration is admin.
* Then make sure the IP address of your device, which is a computer or PC, is on the same subnet as the device. It implies that your device has an IP address of 192.168.01.
* This implies that you need to reset the password of the TP-Link extender. And after this, you must need a new password to log in the extender to connect with the existing signals. So, you may know how to reset TP-Link extender password.

### Configure My TP-Link WPS Wifi Extender:-

1. Next, you plugged the extender into a power outlet near your main router.
2. Then click the WPS button on the main router. And suddenly press the WPS button on your extender.
3. This process will take 2 minutes. Now, wait 2 minutes. Next, check your extender's wireless LED light signals. This shows that the TP-Link extender setting is correct or not.
4. Then if your extender's wireless LED signal light is still off. It means that your process could not see the TP-Link wps wifi extender.
5. At the end, place the TP-Link extender at the exact place where you want to extend the coverage of the wireless network. Once this is done, you don't have to repeat the process, it automatically connects to the server time every time you reconnect to it.

**About us:-**
Wifi Extender Hub provided the best phone solutions with good services. So if you are going to take a new extended connection then go with wifi extender hub. They give best services as you will like.