Smooth deformations from sports balls without damaging the paintwork are the most favorite work for craftsmen, since in such cases the metal does not receive critical stretching and sharp bends, and therefore it can be returned to its factory condition 100%. Here, even the door trim does not always need to be removed: the master lowers the glass, inserts a special protective screen with a special cushion into the window opening and, through thin technological hooks, begins to carefully redistribute the tension of the metal, raising the bottom of the dent with microscopic point presses. You can find a full specification of the process, the nuances of working with aluminum and steel parts, as well as examples of complex body restorations directly on the service page https://autobodylab.com/services/pdr/, where the skill of restoring glare without repainting is demonstrated in detail. After the procedure is complete, there will be no trace left on the body, the structure of the factory varnish (crackle) will be completely preserved, and the work itself will last a maximum of an hour and a half over a cup of coffee. The main thing is not to try to squeeze it out from the inside with your fingers or folk methods like magnets or dry ice, because that will only create unnecessary "pimples", which are much more difficult and expensive to fix.